Digicom Network Router SNT06 1 User Manual

Data Communication  
SNT06/1  
Isdn modem  
digicom’s SNT06/1, pure ISDN modem, offers the connectivity  
on ISDN network in order to transmit data from any data  
processor or personal computer with serial interface in  
synchronous or asynchronous mode. It seems a modem with  
one serial port in V24/V28 and V35; the same design and the  
same features are available in PC card version SNT13 and in  
a PCMCIA standard format called CCI05.  
By using together SNT06 and CCI05 or any other digicom’s ISDN  
product it is possible to exploit V120 protocol which,together  
with V42bis data compression, allows to increase the  
performances of a single communication channel B up to  
speeds of 115,2 Kbit per second (about 11500 ASCII characters  
transmitted in one second). In fact not evereybody knows that  
with V110 protocol (which is implemented too) it is possible to  
communicate in asynchronous mode on ISDN up to a speed of  
38400 bps. This is limitative if compared to the real ISDN  
potentiality which is used at 64 Kbit and whose cost does not  
depend on speed.  
In case of your access server is PPP/SLIP based, you can use the  
integrated PPP support on SNT06; this is normally used in  
Internet/Intranet or private IP network with Cisco or  
compatible router and SNT06, like all digicom ISDN  
products, is ready to communicate in this environment.  
SNT06 is used as a modem, it supportsAT command, it is easy  
to install and it doesn’t need any particular software on ISDN  
network. SNT06 has an internal telephone book and it manages  
security procedures with caller indentification through support  
to Call ID functions which are offered by ISDN network.  
PPP  
TECHNICAL FEATURES  
l Euro ISDN compatible: NET 3 BRI.  
l PPP internal support  
l Rate Adaption: V110, V120.  
l V.42bis data compression.  
l AT and V25bis commands in synchronous mode HDLC and  
asynchronous.  
l Autospeed up to 115.2 Kbit/s.  
l Synchronous working up to 64 Kbit per channel.  
l Asynchronous working up to 115.2 Kbit per channel.  
l 20 numbers phone book usable in AT compatible and V25bis  
mode.  
l Security function with caller identification (Caller ID support).  
l Compatible with most popular communication programs.  
l Used as an Hayes compatible modem.  
l Multinumber ISDN network service.  
l Sub-addressing ISDN network service (SUB).  
l Caller identity ISDN network service (CLIP).  
l Line interface on RJ45 connector for S/T bus.  
l V24/V28 and V35 serial interface.  
l 220 V power supply 50Hz.  
l Consumption: 10W.  
l Temperature: from -5 to 45°C.  
l Maximum humidity 90% non condensing.  
l Standalone version dimensions: 190 x 147 x 45 mm.  
l Rackmount version dimensions: for 4 units rack high  
and 19" width.  
l Standalone version weight: 150 gr.  
PRODOTTO  
SNT06/1  
CODICE  
DESCRIZIONE  
8D5372  
ISDN modem V24/V35 PPP/V110/  
V120/V42bis  
THIS DOCUMENT IS SUBEJCT  
TO CHANGE WITHOUT NOTICE  
SNT06-1 17/02/97  
 

Coleman Tent 2000001591STITCHLINE User Manual
Compaq Security Camera 113803 001 User Manual
Continental Electric Fryer CE23379 User Manual
Craftsman Lawn Mower 28928 User Manual
Delta Electronics Power Supply CKI24H User Manual
Ducane Gas Grill 27010332 User Manual
Ecom Instruments PDAs Smartphones X20 User Manual
EdgeStar Ice Maker IP210SS User Manual
Extron electronic Network Card RGB 160 User Manual
GBC Paper Shredder 1036S 2 User Manual