BURNER REPLACEMENT
Models: 6000TR-OAK, 6000TRI, 6000TRXI
- Installation Instructions -
CAUTION! Risk of Cuts or Abrasions. Wear protective
gloves and safety glasses during installation. Sheet metal
edges are sharp.
KIT CONTENTS:
• Burner Assembly
• Pilot Bracket
• Additional burner neck (not for all models)
1. Remove existing logs, grate and burner.
2. Replace existing pilot bracket with new pilot bracket
The new pilot bracket is 1/4 inch taller.
3. Install new burner.
4. Determine whether or not fireplace is equipped with
slide mechanism shutter assembly that is adjustable
from outside the firebox.
• If it is not equipped with this assembly, replace burner
neck on burner assembly with additional burner neck
included with the kit. Remove air shutter from old
burner neck by removing one screw. Reinstall on
new burner neck.
Figure 1
• If it is equipped with the assembly use burner as
supplied with the kit.
5. Install logs according to log placement instructions.
6. Some models are equipped with refractory. Trim
refractory panels to fit if necessary.
Please contact your Heat & Glo dealer with any questions
or concerns.
For the location of your nearest Heat & Glo dealer,
Heat & Glo, a brand of Hearth & Home Technologies Inc.
7571 215th Street West, Lakeville, MN 55044
Heat & Glo • Burner Replacement Installation Instructions • 2187-901 Rev. E • 2/12
1
|
GPX Portable Multimedia Player MT861B User Manual
Grandstream Networks Telephone GXP 2010 User Manual
Grizzly Nail Gun G1847 User Manual
Healthrider Treadmill HRTL07120 User Manual
Hearth and Home Technologies Switch WSK100 User Manual
HP Hewlett Packard Barcode Reader xw460c blade workstation User Manual
HP Hewlett Packard Speaker 4275A User Manual
Humminbird Fish Finder Wide 100 User Manual
Igloo Water Dispenser MWC509 User Manual
iLive Clock Radio ICB352B User Manual