Harbor Freight Tools Motorcycle Accessories 95896 User Manual

1250 LB Low profiLe  
motorcycLe doLLy  
model 95896  
AssemBLy And operAtion instructions  
Duetocontinuingimprovements,actualproductmaydifferslightlyfromtheproductdescribedherein.  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Visit our website at: http://www.harborfreight.com  
to preVent serious injury, reAd And understAnd  
ALL wArnings And instructions Before use.  
©
®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of  
this manual or any artwork contained herein may be reproduced in any shape  
or form without the express written consent of Harbor Freight Tools.  
fortechnicalquestionsorreplacementparts,pleasecall1-800-444-3353.  
 
2. dress properly. do not wear loose clothing or jewelry. contain long hair. keep  
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry,  
or long hair can be caught in moving parts.  
3. use safety equipment. Nonskid safety shoes, hard hat, or hearing protection must  
be used for appropriate conditions. Always wear ANSI-approved safety goggles and  
a dust mask/respirator when using or performing maintenance on this tool.  
use And cAre  
1. maintain motorcycle dolly with care. When properly cleaned, the Dolly is easier  
to steer and control. Do not use if damaged.  
2. check for misalignment or binding of wheels, breakage of parts, and any other  
condition that may affect the dollys operation. if damaged, have dolly serviced  
before using. Many accidents are caused by poorly maintained tools.  
3. use only accessories that are recommended by the manufacturer for your  
model. Accessories that may be suitable for one tool may become hazardous when  
used on another tool.  
serVice  
1. service on dolly must be performed only by qualied repair personnel. Service  
or maintenance performed by unqualified personnel could result in a risk of injury.  
2. when servicing dolly, use only identical replacement parts. Use of unauthorized  
parts or failure to follow maintenance instructions may create a risk of injury.  
specific sAfety ruLes  
1. maintain labels and nameplates on the tool. These carry important information.  
If unreadable or missing, contact Harbor Freight Tools for a replacement.  
2. maintain a safe working environment. Make sure there is adequate surrounding  
workspace. Do not use this product in a damp or wet location.  
3. do not exceed maximum load for this product (1250 lbs.). Loading a heavier  
object on this product can result in dangerous conditions to both the operator and  
the item loaded.  
4. use dolly only on level, dry surfaces that are capable of bearing the combined  
weight of the dolly and motorcycle.  
5. use dolly for motorcycle onLy. Do not use Dolly to move any other item or per-  
son.  
6. secure motorcycle rmly using belts or straps (not included). See illustrations  
on page 5.  
7. when motorcycle is loaded and secured, move slowly to avoid tipping.  
8. put handles on carriage A and carriage B in down position when not in use  
to lock the wheels.  
for technical questions, please call 1-800-444-3353.  
SKU 95896  
Page 3  
 
9. never load dolly by riding motorcycle onto it.  
10. no one should ever sit on the motorcycle while it is loaded on the dolly.  
11. do not allow children to play on or around motorcycle when loaded. Do not  
allow children to play on Dolly. Children should not be allowed in work area when  
motorcycle is being loaded or when Dolly is in use.  
unpAcking  
When unpacking, check to make sure that the item is intact and undamaged. If any  
parts are missing or broken, please call Harbor Freight Tools at the number shown on the  
cover of this manual as soon as possible.  
AssemBLy  
1. Attach five Casters Assemblies (4) to Frames (1,2) and Side Tray (3) with M6 Bolts  
(9), #6 Washers (10) #6 Lock Washers (11) and M6 Nuts (12).  
2. Bolt Connecting Plates (5) to both sides of Carriage A (6) and Frame A (1) with M6  
Bolts (9), #6 Washers (10), #6 Lock Washers (11) and M6 Nuts (12).  
3. Bolt Connecting Plates (5) to both sides of Carriage B (7) and Frame B (2) with M6  
Bolts (9), #6 Washers (10), #6 Lock Washers (11) and M6 Nuts (12).  
4. Connect Frame A and Frame B together with Connecting Pipes (8) using M8 Bolts  
(14), #8 Washers (15), #8 Lock Washers (16), and M8 Nuts (17).  
5. Bolt Side Tray onto Frame Assembly with M8 Bolts (14), #8 Washers (15), #8 Lock  
Washers (16), and M8 Nuts (17).  
6. Insert the two Stop Pins (13) into slots at each end of the Frame Assembly and  
firmly tighten.  
operAtion  
1. BEFORE EACH USE, inspect the general condition of the Dolly. Check for loose  
screws, misalignment or binding of moving parts, cracked or broken parts, and any  
other condition that may affect its safe operation. If abnormal noise or vibration occurs,  
have the problem corrected before further use. Do not use damaged equipment.  
2. Test Dolly to make sure it rolls smoothly.  
3. Put Handles on Carriage A (6) and Carriage B(7) down to lock Dolly in place.  
4. Remove Stop Pin (13) and push motorcycle onto Dolly. For safety, it is recommended  
that 2 people balance and roll the motorcycle onto Dolly.  
5. Lower motorcycle kickstand onto Side Tray (3) and rest motorcycle in place.  
6. Replace Stop Pin.  
7. Secure motorcycle securely to Dolly using belts or straps (not included).  
8. Raise handles on Carriage A and Carriage B to move Motorcycle with Dolly.  
See Examples on next page.  
for technical questions, please call 1-800-444-3353.  
SKU 95896  
Page 4  
 
Kickstand down and on Side Tray  
Secured With Straps  
Secured With Straps  
for technical questions, please call 1-800-444-3353.  
SKU 95896  
Page 5  
 
pArts List  
No.  
1
Description  
Qty  
1
Frame A  
2
Frame B  
1
3
Side Tray  
1
4
Caster Assembly  
Connecting Plate  
Carriage A  
Carriage B  
Connecting Pipe  
M6 Bolt  
5
5
4
6
1
7
1
8
2
9
28  
28  
28  
28  
2
10  
11  
12  
13  
14  
15  
16  
17  
#6 Washer  
#6 Lock Washer  
M6 Nut  
Stop Pin  
M8 Bolt  
10  
10  
10  
10  
#8 Washer  
#8 Lock Washer  
M8 Nut  
for technical questions, please call 1-800-444-3353.  
SKU 95896  
Page 6  
 
7
13  
4
2
14  
8
14  
1
3
12  
11  
10  
9
4
13  
5
6
for technical questions, please call 1-800-444-3353.  
SKU 95896  
Page 7  
 
pLeAse reAd tHe foLLowing cArefuLLy  
tHe mAnufActurer And/or distriButor HAs proVided tHe pArts List And  
AssemBLy diAgrAm in tHis mAnuAL As A reference tooL onLy. neitHer tHe  
mAnufActurer or distriButor mAkes Any representAtion or wArrAnty  
of Any kind to tHe Buyer tHAt He or sHe is quALified to mAke Any repAirs  
to tHe product, or tHAt He or sHe is quALified to repLAce Any pArts of  
tHe product. in fAct, tHe mAnufActurer And/or distriButor expressLy  
stAtes tHAt ALL repAirs And pArts repLAcements sHouLd Be undertAken  
By certified And Licensed tecHniciAns, And not By tHe Buyer. tHe Buyer  
Assumes ALL risk And LiABiLity Arising out of His or Her repAirs to tHe  
originAL product or repLAcement pArts tHereto, or Arising out of His  
or Her instALLAtion of repLAcement pArts tHereto.  
Limited 90 dAy wArrAnty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high  
quality and durability standards, and warrants to the original purchaser that this product  
is free from defects in materials and workmanship for the period of 90 days from the date  
of purchase.This warranty does not apply to damage due directly or indirectly, to misuse,  
abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,  
improper installation, normal wear and tear, or to lack of maintenance.We shall in no event  
be liable for death, injuries to persons or property, or for incidental, contingent, special  
or consequential damages arising from the use of our product. Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitation  
of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDINg THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the com-  
plaint must accompany the merchandise.If our inspection verifies the defect, we will either  
repair or replace the product at our election or we may elect to refund the purchase price  
if we cannot readily and quickly provide you with a replacement. We will return repaired  
products at our expense, but if we determine there is no defect, or that the defect resulted  
from causes not within the scope of our warranty, then you must bear the cost of return-  
ing the product.  
This warranty gives you specific legal rights and you may also have other rights which  
vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
record products serial number Here:  
note:  
If product has no serial number, record month and year of purchase instead.  
note:  
Some parts are listed and shown for illustration purposes only, and are not avail-  
able individually as replacement parts.  
for technical questions, please call 1-800-444-3353.  
SKU 95896  
Page 8  
 

Greenheck Fan Ventilation Hood SMD 301V User Manual
HannsG Computer Monitor JG191A User Manual
Harbor Freight Tools Lathe 33684 User Manual
Harbor Freight Tools Patio Furniture 9018 User Manual
Hasbro Two Way Radio 2148 User Manual
Hotpoint Washer WMA64 User Manual
HP Hewlett Packard Computer Hardware ML330 User Manual
HP Hewlett Packard Computer Hardware Workstation User Manual
HP Hewlett Packard Personal Computer 413742 001 User Manual
iHome MP3 Docking Station iH31H User Manual