Digicom Network Router SNM50 User Manual

Telematics  
o
/
S
SNM50  
V34+ (33.6) professional modem  
SNM50 modem and its card version SNM54 for RMC2x  
Switched HUB, are high performing telematic solutions for  
data transmission in all professional applications; they have  
been projected to suit with any information system, from  
Personal Computers to MacIntosh systems, to Local Network  
Servers or Unix or Mainframe and allow communications up  
to 33.600 bps on any switched or 2 and 4 wires leased line,  
both for local and long distance lines.  
Thanks to the supported modulation standards SNM50 is a real  
multistandard, which is able to communicate with any other  
modems in conformity with ITU-T regulations; it works in full/  
half duplex with V13 support and also in digital multipoint  
applications.  
It’s perfect for all synchronous and asynchronous applications,  
client side or server side; SNM50 has got special features  
that allow to solve applicative problems other modems can  
hardly work out:  
l
automatic back-up and restore of point to point and multipoint  
leased connections  
l
l
l
l
l
l
l
l
l
back-up management on modems pull  
clock/calendar  
programmable agenda  
internal telephone book  
security management with programmable procedures and password  
dial-in/dial-out management client and server side  
client and server side call back  
client and server side extended call back  
100 items of telephone book associated to security, call back and  
special programmings  
l
l
l
l
20 programmable configurations in memory  
character teleprogramming  
tele download of complete configuration  
management by digicom MSS01 for back-up-restore  
and dial-in/out applications  
l
l
l
l
V54 diagnostic  
flash eprom for upgrade of new functions  
AT call compatible with extended command set  
V25bis HDLC call mode with ASCII codes (for AS400 and IBM  
Mainframe)  
l
asynchronous working from 300 to 33600 bps with all formats up to  
11 bit  
l
l
l
synchronous working on all speeds from 1200 to 33600 bps  
auto-adapting line speed according to error rate  
main and command port for special dual DTE applications  
(through proper cable)  
SNM50 is a modem growing according to the  
customer’s needs; it is compatible with SLIP and  
PPP applications in Internet but also with access  
solutions to private networks with Remote Access  
Server of Windows NT or similar solutions in  
Novell, Unix and IBM AS400 or Mainframe  
environments.  
The rack Switched HUB with SNM54 is a very good  
solution for Internet Provider thanks to its multistandard  
support up to 33600 bps.  
In 5250(AS400)or 3270(Mainframe)synchronousenvironments,  
the product can support both switched applications and leased  
ones with back-up and management.  
THIS DOCUMENT IS SUBEJCT  
TO CHANGE WITHOUT NOTICE  
SNM50 05/11/98  
 

Clover Electronics Security Camera RD135H User Manual
Coleman Tent 2000007825 User Manual
Cornelius Water Pump 45098 User Manual
Crate Amplifiers Music Mixer CSM12 User Manual
Crock Pot Cooktop VersaWare Pro User Manual
Earlex Carpet Cleaner SC125 User Manual
Edimax Technology Security Camera IC 9000 User Manual
Extron electronic Stereo Receiver HDMI 201 Rx User Manual
GE Air Conditioner AZ75W09DAC User Manual
GE Oven JKP30BM User Manual