s
Gigaset USB Adapter 300
Gigaset
Contents
Wireless LAN basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Local Area Network (LAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Ad-hoc network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Infrastructure network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Security in the wireless network: Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
WEP encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
WPA encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
WPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reach of wireless connections over WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Running installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting the Gigaset USB Adapter 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installing the driver software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Checking installation and establishing a connection . . . . . . . . . . . . . . . . . . . . . . . . . 16
Reading the connection quality on the icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
The Gigaset WLAN Adapter Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Opening the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Deactivating Autostart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operating the Gigaset WLAN Adapter Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Closing the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Configuration with WPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Configuration – Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Configuration – Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Configuration – Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
IP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Site Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3
Contents
Uninstalling the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Completing uninstall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Updating the device driver . . . . . . . . . . . . . . . . . . . 45
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4
Safety precautions
Safety precautions
u
40°C). Do not use the device in a damp or wet environment, with dust or vapours.
u
u
The device may affect medical equipment.
Make sure you include the operating instructions and the CD-ROM when you pass
on your device to somebody else.
The Gigaset USB Adapter 300 supports WPS (Wi-Fi Protected Setup). This means that if
your access point also supports WPS, you can set up all security settings automatically
and connect with your access point very simply (see page 21).
If you are not using WPS, you should make some security settings on the wireless net-
work as soon as you have installed the Gigaset USB Adapter 300 on your PC:
u
Change the SSID for all wireless devices in your network
(see "SSID (Service Set Identifier)" on page 28).
u
Encrypt the communication over your wireless network (see "Configuration – Secu-
rity" on page 31).
Your contribution to the environment (ECO)
We at Gigaset Communications GmbH make our products as environmen-
tally compatible as possible. Our goal is a sustainable process that makes it
easier for us to comply with the strict stipulations of the ISO standard 14001
for international environmental management.
Further advantages for the ecology
u
Thanks to a switched-mode power supply, all our routers and repeaters use up to
60% less power and so offer higher energy efficiency.
u
You can reduce the WLAN's transmitting power for all routers and repeaters and
some WLAN clients – depending on the device in question and your PC's operating
system.
u
You can turn off the WLAN completely.
5
Your contribution to the environment (ECO)
Trademarks
Gigaset Communications GmbH is a trademark licensee of Siemens AG.
Microsoft, Windows 2000, Windows XP and Windows Vista are registered trademarks of
Microsoft Corporation.
Note:
Brand or trade names that appear in this guide are used to indicate individual steps in
operation and do not mean they are freely available. Brand and trade names always
remain the property of their respective owners.
6
The Gigaset USB Adapter 300
The Gigaset USB Adapter 300
The Gigaset USB Adapter 300 is a WLAN network adapter, which is connected to your PC
via USB (Universal Serial Bus). Gigaset data products make it very easy for you to set up
a local wireless network without having to lay any cables (WLAN = Wireless Local Area
Network).
You can use your Gigaset USB Adapter 300 to connect your PC to a wireless router, e.g.
a Gigaset SE366 WLAN, so that you can access the Internet (infrastructure mode).
You can also connect your PC to other PCs that are equipped with wireless network
adapters (ad-hoc mode).
Since the PCs communicate with each other over radio waves, it does not matter
where they are located, as long as they are within range of the wireless network.
Mobile PCs such as notebooks can link up to the WLAN from various positions without
any difficulty. This enables you to use all the files and printers on the network. The
Gigaset USB Adapter 300 operates in compliance with the IEEE 802.11n transmission
standard (draft, see note below) and is downwards compatible with the previous
IEEE 802.11g and IEEE 802.11b standards. For network security, wireless transmission
can be encrypted using the WPA standard or 64/128-bit WEP.
Note:
Transmission standard IEEE 802.11n is still pending approval, which is likely to
be granted in the second half of 2008. Your Gigaset USB Adapter 300 is ready to com-
ply with the new transmission standard. You might have to update the software for
your device (page 45).
This user guide instructs you on how to set up a WLAN and gives you important infor-
mation on installation and configuration of your Gigaset USB Adapter 300.
Wireless LAN basics
This section describes some of the basic principles of wireless LANs to show how the
Gigaset USB Adapter 300 functions when you set up a wireless network.
Local Area Network (LAN)
A LAN is a network that exists in a limited area. By a network we mean two or more PCs
that are connected to each other and share files and peripheral devices, e.g. printers.
The Gigaset USB Adapter 300 allows you to communicate with other PCs without having
to lay any network cables. You can therefore also take your PC to another location
without losing the link to the network or the Internet.
7
The Gigaset USB Adapter 300
You can use the Gigaset USB Adapter 300 in two different ways. Firstly, you can set up
a direct connection to one or more PCs with wireless network adapters. This is called an
ad-hoc network. Secondly, you can establish a connection to an access point, which
gives you access to an existing wired LAN (infrastructure network).
The SSID (Service Set Identifier) is the name of a wireless network. It must be identical
for all components of this network.
Ad-hoc network
In an ad-hoc network, PCs communicate with each other via wireless connections. An
ad-hoc network is set up by participants as and when required. All the PCs involved must
have a wireless network adapter installed, e.g. a Gigaset USB Adapter 300 or a Gigaset
PC card 300. Ad-hoc networks are used wherever communications networks have to be
set up quickly and without any existing network infrastructure, and where participants
are on the move.
Infrastructure network
In an infrastructure network, connections are set up between participants over one or
more access points. An access point serves as the basis for the wireless network. It con-
trols connections between the connected participants and can also establish links from
the PCs in a wireless network to a wired LAN (Ethernet) or to the Internet.
Roaming
Several access points can be installed to extend the range of a wireless network. Partic-
ipants in the wireless network can move freely between the various access points with-
out losing contact with the network. As soon as there is a risk of losing contact, the PC
automatically looks for another access point with a stronger signal. All access points and
wireless network adapters must have the same SSID. All access points must be con-
nected to the same Ethernet network.
8
The Gigaset USB Adapter 300
Security in the wireless network: Encryption
Any network, be it wired or wireless, is exposed to the risk of eavesdropping.
Connecting your local network to the public network exposes your data and applications
to some considerable risk. In the same way as with an individual connection, you should
always install a virus scanner to protect your PCs against malicious covert external
attacks, e.g. via e-mail.
These virus scanners, however, do not provide any protection against unauthorised
access from outside (hackers). To counter this risk, Gigaset data products offer various
encryption procedures that largely rule out unauthorised access (hacking) to your
wireless network.
WEP encryption
WEP encryption (Wired Equivalent Privacy) encodes data for sending using a key that
you have defined. On the recipient's side, the same key is used to re-arrange the data so
that it is available in the same format as it was prior to transmission. Recipients who do
not know this key cannot read the content of this data stream or can only read it with a
great deal of technical effort.
There are two security levels for calculating the encryption key:
u
u
64-bit mode
128-bit mode
WPA encryption
WPA is a new standard-compliant solution for greater security in wireless networks. WPA
is intended to replace the existing WEP standard (Wired Equivalent Privacy) and offers
more reliable encryption and authentication methods.
With your Gigaset USB Adapter 300 you can use WPA encryption independently of the
operating system you have in use. WPA encryption is particularly recommended where
the highest security is required.
9
The Gigaset USB Adapter 300
WPS
Wi-Fi Protected Setup (WPS) makes it easier to establish a wireless network. A wireless
network has a name (SSID) and requires encryption of data traffic against the risk of
eavesdropping. The access point requires authentication with an SSID and key to allow
a WLAN adapter to access the services.
Devices with WPS automatically create a SSID and a WPA encryption key (Pre-Shared
Key) and synchronise with each other.
WPS provides two possibilities:
u
Push Button Configuration (PBC)
This is the registration mode Without PIN (Apply) on your Gigaset USB Adapter 300.
A WPS button is provided on the access point (e g. Gigaset SE 366) and a Registration
button on Gigaset devices. After pressing this button, the device is ready for regis-
tration for two minutes. The first time you press the button, the device automatically
creates an SSID and a Pre-Shared Key. If a client (WLAN adapter) activates its WPS
function within these two minutes, the security data is interchanged and a connec-
tion is established. It is ensured that only one client can synchronise within the two
minutes.
u
Personal Identification Number (PIN)
This is the registration mode Enter partner device PIN or Send own PIN respec-
tively on your Gigaset USB Adapter 300. A PIN is generated on one device (access
point or client) and has to be entered on the other device. The security data is then
synchronised.
When you use an access point without WPS in your network, you can configure the secu-
rity settings (SSID and key) for the Gigaset USB Adapter 300 manually. You cannot use
WPS for networks with WEP encryption.
The Gigaset USB Adapter 300 supports WPS. For further information, see chapter
"Configuration with WPS" on page 21.
Reach of wireless connections over WLAN
Outdoor reach is up to 300 m. In buildings, the reach is up to 50 m. Depending on the
environmental conditions, features of the rooms and buildings, the reach may be con-
siderably less. You can increase the reach of your wireless network by changing the
alignment of the antenna, positioning your device at another place or installing a
repeater, e.g. the Gigaset SE365 WLAN, at the point where your current reach expires.
10
Installing the Gigaset USB Adapter 300
Installing the Gigaset USB Adapter 300
System requirements
To operate the adapter, you need:
u
A PC running at a minimum of 466 MHz and one of the following operating systems:
Windows Vista, Windows XP or Windows 2000
u
u
u
u
64 MB RAM, more memory is recommended
Minimum free hard drive capacity of 30 MB
A free USB slot
A CD-ROM drive or a DVD drive
Contents
The package contains the following components:
u
u
u
One Gigaset USB Adapter 300
One USB cable and a stand for the adapter
One CD-ROM with installation and configuration software, the detailed user guide
and Adobe Reader, which you will need to read the user guide
u
One Quick Start Guide
Installation process
Note:
Only connect the Gigaset USB Adapter 300 to a free USB port on your PC when the
Install Shield prompts you to do so.
First, the software included in delivery must be installed. This software contains both
the driver software for the device and the tool for configuring and monitoring the
Gigaset WLAN Adapter Monitor.
Only this software has been tailored precisely to the Gigaset USB Adapter 300. Similar
drivers are included with the Windows driver databases. However, such drivers do not
usually offer the full range of features or function in a completely different way.
Do not connect the Gigaset USB Adapter 300 to your PC until you are prompted to do so.
If you insert the Gigaset USB Adapter 300 on your PC before the software is installed,
Windows recognises the device automatically and displays a dialog window prompting
the appropriate drivers. Click Cancel to close the dialog box. Remove the Gigaset USB
Adapter 300 from the PC and start again by installing the software.
Note:
You may require administrator rights on your PC for the installation process.
11
Installing the Gigaset USB Adapter 300
Running installation
ì Close all running programs.
ì Insert the CD-ROM that is included in delivery into the CD-ROM or DVD drive on your
PC and wait until the start window is displayed. If the start window does not appear
automatically on your PC, start the installation manually:
– Open Windows Explorer.
– Select the CD-ROM or DVD drive.
– Double-click the program start.exe.
The language selection screen appears.
ì Select your language.
A window with a list of the CD-ROM contents appears.
Installation
User guide
Installs the software for your Gigaset USB Adapter
300.
This opens the detailed user guide on the CD-ROM.
If you cannot open the detailed user guide on the
CD-ROM, you must first install AdobeReader,
which is included on the CD.
Installing Adobe Reader
Searching the CD
Installs Adobe Reader.
If you are looking for a particular file on the
CD-ROM, you can display the CD-ROM contents in
an Explorer window.
Back
The program returns to the language selection
screen.
Exit
This closes the program.
ì Click Installation.
Note:
The windows in the different operating systems differ only very slightly. Installation
is largely automatic, apart from a few mouse clicks and restart processes.
The InstallShield Wizard appears on the screen.
12
Installing the Gigaset USB Adapter 300
ì Click Next to continue installation.
In the next screen, choose the directory for the installation.
ì Click Browse, if you want to select another directory. Click Next to continue instal-
lation.
During installation, the InstallShield Wizard uses the setup progress window to show the
action that is currently executing and the progress made in installation.
Connecting the Gigaset USB Adapter 300
ì Only connect the Gigaset USB Adapter 300 to a free USB port on your PC when the
Install Shield prompts you to do so.
For this purpose you have the following options:
u
You can connect the Gigaset USB
Adapter 300 as a stick directly to a free
USB port on your PC.
13
Installing the Gigaset USB Adapter 300
u
You can connect the Gigaset USB
Adapter 300 to a free USB port on your
PC via the USB cable supplied.
u
To optimally adjust the Gigaset USB
Adapter 300 for operation in a fixed
location you can install it with the
supplied stand.
Operating the Gigaset USB Adapter 300 with the stand
ì Open the stand. To do this, pull the front of the
stand about 2 mm upwards (1) and then
remove it forwards (2).
1
ì Push the USB cable from below through the
4
stand (3).
ì Press the USB plug between the fixtures in the
direction of the arrow. Make sure that the logo
on the plug is pointing forward (4).
2
3
ì Close the stand. Make sure that the clamps on
the front of the stand snap in (5).
ì Pass the cable through the channel in the bot-
tom and insert it in a free USB port on your PC
(6).
6
5
14
Installing the Gigaset USB Adapter 300
ì Put the Gigaset USB Adapter 300 in the stand
with the LEDs facing forward (7).
7
Proceed in the reverse order to disassemble the stand.
About the installation location
Select the location in a way that allows as few obstacles as possible to interrupt the radio
waves. Protect the Gigaset USB Adapter 300 from damp.
The Gigaset USB Adapter 300 should not be placed directly next to other electrical
devices. Electrical equipment can mutually affect each other. The radio waves may
impair the function of other devices.
Install the Gigaset USB Adapter 300 on an even, non-slip ground. Protect especially sen-
sitive surfaces.
For greater reach, we recommend setting the WLAN component up in a central, open
position. For example, avoid installation in recesses, cubbyholes, under a desk or behind
cupboards.
Installing the driver software
Once you have connected the Gigaset USB Adapter 300, the installation will continue
automatically. The operating system's automatic hardware recognition function opens
in order to install the drivers for the Gigaset USB Adapter 300.
Note for installation on Windows XP
If Windows XP SP1 is installed on your system, a query window will open.
ì Select the option Installing the software automatically and click Next.
If Windows XP SP2 is installed on your system, the Windows Update function offers to
search for a suitable program for you.
ì Select the option No, not this time and click Next.
ì Then select the option Installing the software automatically and click Next.
15
Installing the Gigaset USB Adapter 300
Note for installation on Windows Vista
Depending on the Windows Vista version on your PC, a newer version of the driver for
Gigaset USB Adapter 300 may be on your computer.
ì Click YES to use this driver (recommended).
Click No to overwrite it with the driver from the CD-ROM.
ì Select the option Finish in the next window to close the hardware wizard.
ì If you are prompted to restart the PC, select this option and click Finish.
The installation will be finished.
Checking installation and establishing a connection
If installation was successful, you can now use the Gigaset WLAN Adapter Monitor.
Use the Gigaset WLAN Adapter Monitor to configure your Gigaset USB Adapter 300
and establish a connection to other network adapters or to an access point.
The Gigaset WLAN Adapter Monitor is represented by an icon in the status area of the
taskbar. This icon shows you if there is a connection to a connection partner and the
quality of the connection.
A connection is only possible if you have configured the security setting for your Gigaset
USB Adapter 300 beforehand either via WPS (see page 16) or manually (see page 31).
16
Installing the Gigaset USB Adapter 300
The following may be displayed in the status area of the taskbar:
The Gigaset WLAN Adapter Monitor icon is not displayed.
ì First try to open it manually, see the section entitled
u
"Opening the monitor" on page 19.
If this fails, then something went wrong during installation.
ì Uninstall the software, see the section entitled "Unin-
stalling the software" on page 44.
ì Then install the software again, see the section entitled
"Running installation" on page 12.
The Gigaset WLAN Adapter Monitor icon is displayed in the
taskbar with a grey ball above the icon:
Gigaset USB Adapter 300 is not, or is not yet, correctly
inserted.
ì Check the position of the adapter.
The icon is displayed in the taskbar with a red cross above
the icon:
The Gigaset WLAN Adapter Monitor is installed and active.
A connection to the local network has not yet been estab-
lished.
ì Go to the section entitled "Configuring the Gigaset USB
Adapter 300" on page 19.
The icon is displayed in the taskbar with a green ball above
the icon:
The Gigaset WLAN Adapter Monitor is installed and active.
A connection to the local network has been established. The
number of green bars displayed in the icon shows the con-
nection quality.
Please refer to the section entitled "Notes on secure operation" on page 5.
Show QuickInfo for the connection
If you point the mouse over the icon in the taskbar, you will see a small window that
displays the connection properties.
The following properties are shown:
u
u
u
SSID (Service Set Identifier) in the Connection line
The transmission rate (in Mbps) in the Speed line
The transmission quality (in %) in the Link quality line
17
Installing the Gigaset USB Adapter 300
If no connection is currently active, a red cross appears above the icon and Discon-
nected appears in the QuickInfo.
Reading the connection quality on the icon
The icon changes gradually depending on the current connection quality. The better the
connection quality, the higher the transmission speed.
With reasonable to poor connection:
ì If possible, move your PC closer to the connection partner for greater field strength.
No WLAN available (red cross over bar)
There is no LAN available to which you could establish a connection within
the reach of your Gigaset USB Adapter 300.
ì Check the configuration of the access point and adjust the settings for
the Gigaset USB Adapter 300 accordingly.
OR
ì Change your location to reduce the distance to a connection partner.
Status indicators
The Gigaset USB Adapter 300 has two status indicators (LEDs). They are used to indicate
the
u
u
Operating status (Power), green
Transmission status (Link/Act), green
LED
State
Meaning
The Gigaset USB Adapter 300 was installed successfully
on your PC and is ready for operation.
The device is not ready.
There is no connection to the wireless network.
Data is being transmitted.
On
Power
WLAN
Off
On
Blinking
Off
There is currently no data traffic.
18
Configuring the Gigaset USB Adapter 300
Configuring the Gigaset USB Adapter 300
The Gigaset WLAN Adapter Monitor
You use the Gigaset WLAN Adapter Monitor to configure and monitor your
Gigaset USB Adapter 300.
Opening the monitor
In the standard setting, the Gigaset WLAN Adapter Monitor is started automatically in
the background when you launch your PC. The Gigaset WLAN Adapter Monitor icon is
displayed in the status area of the taskbar.
ì Double-click the Gigaset WLAN Adapter Monitor icon in the status area of the task-
bar to open the monitor's user interface.
OR
ì Right-click the Gigaset WLAN Adapter Monitor icon in the status area of the task-
bar.
The available tabs and the Exit option are displayed in the pop-up menu.
ì In the pop-up menu, click the appropriate tab to open the monitor user interface and
display this tab directly. Use the Exit option to close the Gigaset WLAN Adapter
Monitor.
Launching the monitor manually
If you do not see the Gigaset WLAN Adapter Monitor icon in the status area of the
taskbar, you will have to run the program first:
ì In the start menu, click Start – Programs – Gigaset USB Adapter 300 – Gigaset
WLAN Adapter Monitor.
The program is launched. The Gigaset WLAN Adapter Monitor icon is displayed in the
status area of the taskbar.
19
Configuring the Gigaset USB Adapter 300
Deactivating Autostart
The Gigaset WLAN Adapter Monitor is opened automatically every time you launch
your PC. If you do not need the monitor all the time, you can deactivate Autostart.
ì Select Start - Programs - Autostart.
ì Right-click the Gigaset WLAN Adapter Monitor entry.
ì Select Delete to remove the link to Gigaset WLAN Adapter Monitor from Auto-
start.
Since this means that the monitor will not be launched each time you start your PC, you
will have to start it manually when required (see page 19).
Operating the Gigaset WLAN Adapter Monitor
In the Gigaset WLAN Adapter Monitor user interface, you will find various settings and
status displays for your network adapter on various tabs, which are described in detail
in the following section.
Buttons
Click the buttons beneath each tab to use one of the following options:
Wireless operation is activated for the network adapter (green
icon). The PC is available on the network.
ì Click Radio On to deactivate wireless mode on the network
adapter.
Radio Off is displayed. The PC is no longer available on the
network.
Wireless mode is deactivated for the network adapter (red icon).
The PC is not available on the network.
ì Click Radio Off to activate the network adapter's radio mode.
Radio On is displayed. The PC is available on the network.
Use the Help button to open the Gigaset WLAN Adapter Monitor
help file.
Use the Hide button to close the user interface of the Gigaset
WLAN Adapter Monitor.
The icon in the status area on the taskbar indicates that the
monitor is still active in the background.
ì Double-click this icon if you want to open the Monitor user
interface again.
20
Configuring the Gigaset USB Adapter 300
Closing the Monitor
ì Right-click the Gigaset WLAN Adapter Monitor icon in the status area of the task-
bar.
This opens the pop-up menu.
ì Select Exit to close the program.
The Gigaset WLAN Adapter Monitor is closed. The icon disappears from the status
area in the taskbar.
Configuration
On the Configuration tab, you can choose the general basic settings and the security
into three sections:
u
On the Common tab, you can choose the Registration Mode for the security set-
tings and you can make settings for data traffic depending on the selected Registra-
tion Mode.
u
On the Security tab, the security settings are displayed following successful WPS
registration. If you do not use WPS, you can set up the system here to encrypt data
transfer and thus protect your network from unauthorised eavesdropping (see
page 31).
u
In the upper section, you can set various profiles for use in different networks.
(see page 35).
Configuration with WPS
If the access point you want to use to set up a wireless connection to the Gigaset USB
Adapter 300 supports WPS, the WLAN and security settings of the Gigaset USB Adapter
300 may be created automatically via WPS.
One press of a button on the access point and one click of the mouse in the configura-
tion window of your Gigaset USB Adapter 300 is enough to establish the WLAN connec-
tion.
WPS is only possible in Infrastructure mode. You cannot use WPS if other components
in your wireless network only support WEP encryption.
There are three possibilities for setting up the WPS connection:
u
Without PIN (via the WPS key on the access point or the registration button on
Gigaset devices),
u
u
With PIN created on the client and
With PIN from the access point.
You have to choose the Registration Mode according to the settings on your access
point. Please check these settings first or make the settings on the access point as
described in the instructions for this device.
21
Configuring the Gigaset USB Adapter 300
If you have a Gigaset access point, e. g. a Gigaset SE366, the default settings are set
appropriately to the registration mode without PIN.
u
Registration Mode: Without PIN (Apply)
ì Press the WPS button (for Gigaset devices: registration button) on the access point.
ì Click the Apply button within two minutes of pressing the registration button on
the access point to start the wireless connection to the access point.
22
Configuring the Gigaset USB Adapter 300
Registration Mode: Enter partner device PIN
u
ì Enter the PIN generated by the access point.
The PIN must consist of 8 digits. If you enter an incorrect PIN, an error message is
displayed and you can retry.
ì Click the Apply button to set up the wireless connection to the access point.
23
Configuring the Gigaset USB Adapter 300
The Status tab displays the configured data if the connection was successfully estab-
lished within two minutes.
There is no need for further settings. However, you may adapt the values for Sending
Power and Power Saving on the Configuration– Common tab to your situation (see
page 30). The fields in the Status window are described on page 37.
The security settings are saved in the client after successful connection to the access
point. The security settings and the settings for data traffic are available in the default
profile the next time the Gigaset WLAN Adapter Monitor is started.
If the connection to the access point could not be established within two minutes, all
fields in the Status window remain empty. Check whether the Registration Mode you
have chosen corresponds with the setting on the access point and restart the registra-
tion on the access point (see page 21).
26
Configuring the Gigaset USB Adapter 300
Only one client is allowed to connect to the access point within the two
minutes. If an error occurs, check whether another PC tried to connect to
the access point at the same time.
i
Configuration – Manual
Manual configuration of security settings is required if your access point does not sup-
port WPS or some components of your wireless network do not support WPA encryp-
tion.
Successful communication in a WLAN depends on all the PCs using the same ID (SSID)
and the same radio channel. In addition, the connected PCs must coordinate their trans-
mission mode for successful data transfer.
You can choose the basic settings for each profile in the Common section of the
Configuration tab.
ì Select Manual for the Registration Mode
Note:
For security reasons, installation should be followed by changing the SSID of your
WLAN, as the default SSID may also be known to unauthorised persons.
27
Configuring the Gigaset USB Adapter 300
SSID (Service Set Identifier)
The SSID is the ID used for the unique identification of a wireless network (WLAN) so
that this network can be distinguished from a parallel network, for example. Within a
WLAN, all the network adapters must have the same SSID.
ì In the SSID field, select the ID of the partner you want to connect your PC to.
The default setting is ConnectionPoint.
The order for defining the SSIDs depends on the Network Mode of the WLAN:
u
Infrastructure:
The SSID must be defined on the access point first. This SSID is then assigned auto-
matically to every network adapter registering with it.
u
Ad Hoc:
It is important that all the network adapters use the same SSID. The order of entry is
irrelevant.
28
Configuring the Gigaset USB Adapter 300
Network Mode
ì Enter the Network Mode to be used for the desired network environment:
– Infrastructure:
There are wireless (WLAN) and (wired) (LAN) PCs in the network environment.
The connection between WLAN and LAN is set up via an access point.
– Ad Hoc:
the available wireless network adapters as and when required. No access point is
required.
The default network mode is Infrastructure.
Note:
In Ad Hoc mode, the device will always operate in 802.11b transmission mode, i.e.
with a maximum transmission rate of 11 Mbps. You should therefore set up an access
point so that you can transfer large volumes of data quickly.
You will find a detailed description of the network modes in the section entitled "Wire-
less LAN basics" on page 7.
Channel
The Channel field shows the radio channel used to set up communication with the
connection partners. You can choose from radio channels 1 to 13 (in the USA and
Canada 1 to 11).
In Infrastructure mode, the radio channel is set by the access point for all WLAN partic-
ipants and can only be changed there. In this case, the Channel field shows the channel
being used.
For Ad Hoc mode, you set the network adapter channel manually.
ì Select the channel used by the desired connection partners in the ad-hoc network.
If you are using your PC with the Windows Vista operating system, the channel is set
automatically even in Ad Hoc mode.
29
Configuring the Gigaset USB Adapter 300
Transmission mode
The Gigaset USB Adapter 300 is designed to operate according to various WLAN stand-
ards. In Infrastructure mode, you can choose the following transmission modes:
ì Select 802.11g if the network environment uses this WLAN standard.
The maximum transmission rate possible is 54 Mbps.
OR
ì Select 802.11b if the network environment uses this WLAN standard. The maximum
transmission rate possible is limited to 11 Mbps.
OR
ì Select 802.11b/g/n (mixed) if both modes are used in the network. Some of the net-
work adapters operate according to the 802.11g standard, others according to the
802.11b standard.
The maximum transmission rate possible depends on the WLAN standard of the con-
nection partner in question.
In Ad Hoc mode, the 802.11b transmission mode is the default setting.
If you are using your PC with the Windows Vista operating system, the Transmission
Mode is set automatically and 802.11b/g/n (mixed) is displayed.
Power Saving
You can choose two options for the Gigaset USB Adapter 300 in Power Saving mode.
ì Select Optimize power saving to use the network adapter in power-saving mode.
Your PC remains available on the network, but the network adapter's energy
consumption is reduced to a minimum.
ì Select Optimize throughput if you want to achieve a maximum data transmission
rate (default).
This function is not available for Windows Vista.
Sending Power
Depending on the reception quality, you can operate your Gigaset USB Adapter 300 with
low transmission power. You should set the transmission power as low as possible
assuming you achieve good transmission quality in your rooms. This protects your wire-
less network from eavesdropping.
ì Select the required transmission power. Default setting: 100%
This function is not available for Windows Vista.
30
Configuring the Gigaset USB Adapter 300
Configuration – Security
You only have to make the security settings if you did not use WPS for registration on
the access point (see page 21).
The range of a wireless network cannot be restricted to an enclosed area. The advantage
of a location-independent connection set-up brings with it the risk of unauthorised per-
sons eavesdropping on your wireless communications. To avoid misuse of your data, it
is especially important to encrypt transmission over your WLAN.
With Gigaset data products, you can adjust the security settings for each configuration
profile to suit your needs. The following encryption methods are available:
u
u
WPA2-PSK/WPA-PSK (recommended)
WEP, 128-bit or 64-bit
This encryption method is not available for the standard IEEE 802.11n (draft)
(see page 7).
u
WPA2/WPA
For networks with authentication servers, WPA2 or WPA is available:
Note:
Successful communication depends on all the connection partners in a WLAN using
the same security settings (type of encryption and the appropriate keys).
You can perform the security settings in the Security section of the Configuration tab.
Activating security options
On the Configuration – Security tab, the default security mode is Disabled. You can
use this to register on all wireless networks which do not use encryption for data trans-
fer.
If you would like to register on a wireless network where the registration is checked and
data transfer is encrypted, you must activate the security options of your Gigaset USB
Adapter 300.
ì Select the security mode you require from the Security list:
A window opens for you to configure the mode.
31
Configuring the Gigaset USB Adapter 300
WPA2-PSK or WPA-PSK
WPA2-PSK or WPA-PSK offers greater protection for your network than WEP. You should
therefore use one of these encryption methods for registration. Use WPA2-PSK if all
components in your network support this. If you have older devices in your network,
which do not support WPA2-PSK, use WPA-PSK.
ì You can choose the standard to be used for encryption in the Encryption field. WPA-
PSK distinguishes between TKIP and AES. WPA2-PSK always uses AES.
ì In the Pre-shared Key (PSK) field, enter the key you would like to use for registration
on the network.
Note that all components in a network must use the same Pre-shared Key (PSK)
to be able to communicate with each other.
32
Configuring the Gigaset USB Adapter 300
If you would like to register on a network in Infrastructure mode, first define a Pre-
Shared Key (PSK) on your wireless router for your network. Then use this for all remain-
ing components in your network. You can find more information in the user manual for
your wireless router.
ì Click Apply to accept the changes.
WPA2 or WPA
If WPA2 or WPA is used in your network for authentication, you must select the param-
eters according to the settings for the network. Contact your administrator. The new
standard WPA2 uses AES (Advanced Encryption Standard) for encryption.
WEP
Not available for 802.11b/g/n (mixed) transmission mode.
33
Configuring the Gigaset USB Adapter 300
ì In the Key Length field, select the required length of the WEP key.
Note that all components in a network must use the same key length to be able to
communicate with each other.
Use a key 128 bit in length if all network components support this. This offers
greater protection for the data in your network.
ì In the Key Type field, select the character format for creating keys:
– HEX
The keys are entered as hexadecimal characters. Entries should be made with the
digits 0 to 9 and the characters A to F only. 26 hexadecimal characters are used
for a 128-bit key, 10 hexadecimal characters for a 64-bit key.
– ASCII
The keys are formed from characters of the ASCII character set. For a key that is
128 bits in length, 13 characters are used, and for a key with length of 64 bits,
5 characters are used.
After selecting the key length and key type, you can use either a passphrase to generate
your key automatically, or manually enter the key:
u
Generating keys with a passphrase
For encryption, you can use a passphrase from which the required keys are gener-
ated automatically.
ì Activate the Use Passphrase option.
This activates the appropriate entry field.
ì In the Use Passphrase field, enter any sequence of characters as the passphrase.
You can enter up to 260 characters.
Notes:
u
Remember that all the connection partners must use the same passphrase for
encryption.
u
Make a note of your passphrase and store it in a secure place.
ì In the Default Key field, select one of these four created keys with which data trans-
fer on your PC is to be encrypted.
ì Click Apply to accept the changes.
The security options of your Gigaset USB Adapter 300 have now been activated.
u
Creating keys manually
In the Key 1 to Key 4 fields, you can enter up to four keys. The length of the character
string you enter is determined by the settings in the fields Key Length and Key
Type.
ì Enter at least one key in one of the four text fields.
Note:
All connection partners must use the same key.
34
Configuring the Gigaset USB Adapter 300
ì In the Default Key field, select one of these four created keys with which data trans-
fer on your PC is to be encrypted.
ì Click Apply to accept the changes.
The security options of your Gigaset USB Adapter 300 have now been activated.
Configuration – Profile
Selecting a profile
The Gigaset WLAN Adapter Monitor can manage several configuration profiles for
your Gigaset USB Adapter 300. If you want to use your PC in different wireless networks,
for example, you can create several profiles and adjust them to the requirements of the
individual networks. When changing networks, you only need to choose the appropri-
ate profile for registering your PC in the new network.
The Gigaset USB Adapter 300 always uses the settings for the profile displayed in the
Profile field.
Note:
Following installation, the DEFAULT profile contains common settings. When the
connection to the access point is established via WPS, the data is stored in the
DEFAULT profile. You can create and save more than one profile via WPS (e g. if you
use your notebook in different wireless networks). Use different names for the pro-
files in this case.
Creating a profile
ì Click New next to the Profile field.
This opens a dialog for you to enter a profile name.
ì Enter a name for the new profile and confirm your entry with OK. The
maximum length of the profile name is 29 characters.
Note:
To make it easier to recognise them again, it is advisable to use an "illustrative"
name for the profiles. A suitable name for a profile could be the location of the
wireless network.
The valid settings are still shown.
ì Adjust the settings to the requirements of the network environment.
ì Click Save.
35
Configuring the Gigaset USB Adapter 300
This saves your configuration as a new profile. The selection in the Profile field is
expanded to include the new profile name.
Selecting a profile
ì Open the selection in the Profile field.
ì Click the profile name you want.
This activates the selected profile and displays it in the Profile field.
ì Click Apply to activate the selected profile.
Editing a profile
ì Select the required profile in the Profile field.
ì Change the settings where required.
ì Click Save.
This saves your changes in the selected profile.
Note:
Save updates the selected profile. The old settings are overwritten and are no longer
available.
Deleting a profile
ì In the Profile field, select the profile you want to delete.
ì Click Delete.
The name of the selected profile is removed from the selection in the Profile field. The
settings that were stored in this profile are now lost.
Note:
The DEFAULT profile can be changed, but not deleted.
36
Configuring the Gigaset USB Adapter 300
Status
The Status tab provides information about the status of the wireless network your PC is
currently connected to via the network adapter:
u
u
The left-hand pane shows the valid settings for the active configuration profile.
The right-hand and lower panes show the statistics for the previous data transfer.
37
Configuring the Gigaset USB Adapter 300
SSID
Shows the ID for the network environment.
(see "SSID (Service Set Identifier)" on page 28)
Network Mode
Shows the structure of the network environment
(see "Network Mode" on page 29)
Transmission Rate
Channel
Shows the current transmission rate in Mbps.
Shows the channel used for radio transmission
(see "Channel" on page 29)
Transmission Mode
Shows the WLAN standard used for data transmission
(see "Transmission mode" on page 30).
If your PC runs with Windows Vista mode, the transmission
mode 802.11n may not be displayed, depending on the type of
access point in your wireless network.
Security
Shows the encryption method
(see "Configuration – Security" on page 31)
Received Packets
Shows how many data packets have been received on your PC
from connection partners in the current WLAN since the con-
nection was set up.
Sent Packets
Link Quality
Shows how many data packets have been sent to connection
partners in the current WLAN from your PC since the connec-
tion was set up.
Shows the quality of the wireless connection.
The graphic display of the connection quality is supported with
a percentage figure and an evaluation of the signal
(Excellent, Good, Fair, Poor).
Signal Strength
Shows the strength of the radio signal in the wireless connec-
tion.
The graphic display of the signal strength is supported with
a percentage figure and an evaluation of the signal
(Excellent, Good, Fair, Poor).
38
Configuring the Gigaset USB Adapter 300
IP settings
The IP Settings tab provides you with all the information relevant for using your PC in
the network (LAN and WLAN). There are two buttons for renewing or releasing your PC's
WLAN address. A graphic display in the lower section of the tab shows the progress
made by data traffic over the WLAN.
39
Configuring the Gigaset USB Adapter 300
IP Address
Shows the Internet Protocol address with which your PC is regis-
tered in the WLAN. As a rule, the IP address is assigned to your PC
by the DHCP server coordinating the PC's access to a network, in a
WLAN for example the access point's DHCP server.
Host Name
Computer name entered for your PC during installation of the oper-
ating system.
MAC Address
Subnet Mask
Shows the physical address of your network adapter.
Shows the value of the subnet mask that defines the address block
of the IP address.
For example, the value 255.255.255.0 shows that the network
address is formed by the first three blocks of the IP address. The last
block is for the PC addresses in this network. The number of IP
address blocks used for PC addressing depends on the size of the
network and therefore the number of connected PCs.
DHCP Server
Gateway
Shows the IP address of the system that provides the DHCP server
for automatic addressing and coordination of the connected PCs.
Shows the IP address of the system that enables access to a superior
network, for example a connection to the Internet.
Renewing an IP address
ì Click Renew IP Address to connect your PC to a WLAN network.
The network adapter checks whether there is a DHCP server available within its radio
range whose settings are compatible with those of the active configuration profile. If
this is the case, the DHCP server responds to the query by assigning an IP address that
your PC can use to exchange data over the new network.
Releasing an IP address
ì Click Release IP Address to deregister your PC from the current WLAN.
Your PC is deregistered at the DHCP server and is no longer available to the WLAN con-
nection partners. The DHCP server can assign the IP address allocated to your PC to a
new connection partner.
Network utilisation
The diagram in the lower section of the IP Settings tab shows the network utilisation
achieved between the connection partner and your PC.
Divided into data received and data sent, the actual transmission rates are shown and
compared with the theoretical transmission rate available on this WLAN. The percent-
age values are updated continuously in the diagram.
40
Configuring the Gigaset USB Adapter 300
Site Monitor
The Site Monitor tab provides a comprehensive overview of the connection partners
available via the visible SSID. One click reads in a list with all the relevant information on
the potential connection partners. If you want, you can set up a connection to one of
the connection partners shown directly from the list.
Creating the list
ì Click Scan to search the network environment for potential connection partners.
This creates a list of the currently available connection partners.
ì Click Scan again to update the displayed list.
Depending on the reaction time of the various connection partners, updating the list
may take 1 to 2 minutes.
41
Configuring the Gigaset USB Adapter 300
The list shows the following parameters for each connection partner:
SSID
Shows the connection partner's ID
(see "SSID (Service Set Identifier)" on page 28).
BSSID (MAC Address) Shows the connection partner's physical address (Basic Service
Set Identifier).
In networks withAd Hoc mode, the BSSID corresponds to the
Channel
Security
Shows the radio channel the connection partner uses to trans-
mit data (see "Channel" on page 29).
Shows whether radio traffic to the connection partner is
encrypted (see "Configuration – Security" on page 31). If this is
the case, you will see a key icon.
Signal (%)
Shows the signal strength of the radio traffic between your
PC and the connection partner as a percentage
(see "Signal Strength" on page 38).
Transmission Mode
Shows the connection partner's current transmission
mode (see "Transmission mode" on page 30).
If your PC runs with Windows Vista mode, the transmission
mode 802.11n may not be displayed, depending on the type
of access point in your wireless network.
Network Mode
Shows the connection partner's current network mode
(see "Network Mode" on page 29).
Establishing a connection
ì Double-click in the list on the connection partner with which you want to establish
a connection.
This connects your PC to the connection partner.
Note:
If your network adapter's active configuration profile is not compatible with the con-
nection partner's settings, for example encryption has not been set correctly, you will
first see the Configuration – Security tab:
ì Change the settings required for the connection.
OR
ì Select a saved profile.
The connection will then be set up automatically.
42
Configuring the Gigaset USB Adapter 300
About
The About tab provides information about the software company and the version
number of the software installed on your PC. The Internet address takes you directly to
the company's product page containing the latest information and software updates for
your network adapter.
43
Uninstalling the Gigaset USB Adapter 300
Uninstalling the Gigaset USB Adapter 300
You may have to uninstall the Gigaset USB Adapter 300 if:
u
u
An error occurred during installation.
The Gigaset USB Adapter 300 is not working properly and the problem cannot be
rectified (see the section entitled "Troubleshooting" on page 46).
u
u
You have acquired a newer version of the Gigaset USB Adapter 300 and the operat-
ing instructions for the new device recommend uninstalling older versions.
You no longer need the Gigaset USB Adapter 300 and want to free up space on your
hard drive and in working memory.
Uninstalling involves the following steps:
1. First uninstall the software for the Gigaset USB Adapter 300.
2. Then uninstall the hardware.
3. Complete the uninstall process.
Uninstalling the software
To uninstall the software for the Gigaset USB Adapter 300 from your PC:
ì Close all running programs.
ì Select Start – Programs –Gigaset USB Adapter 300 – Uninstall Gigaset USB
Adapter 300.
ì Confirm the security prompt for the uninstall process with OK.
The software and all the drivers will now be removed from your PC.
Note:
Do not restart your PC until you have also removed the hardware.
If you restart your PC before removing the Gigaset USB Adapter 300, Windows will
automatically launch its hardware recognition program. If this happens, close
automatic hardware recognition by clicking Cancel.
Completing uninstall
ì Remove the Gigaset USB Adapter 300 or the USB cable from the USB port of your PC.
ì Follow the remaining instructions and then restart your PC.
44
Updating the device driver
You should update the driver for the Gigaset USB Adapter 300 if a newer driver version
is available. You can find information about the latest driver updates on our website at:
ì Download the latest driver.
Then perform the following steps to update the device driver:
ì Uninstall the software for the Gigaset USB Adapter 300 as described in the section
entitled "Uninstalling the Gigaset USB Adapter 300" on page 44.
ì After restarting your PC, open the directory to which you downloaded the new
drivers.
ì Start the update by double-clicking the file name and follow the instructions given.
You will find further information about installation in the section entitled "Installing the
Gigaset USB Adapter 300" on page 11.
45
Appendix
Appendix
Troubleshooting
Problem
Causes and remedies
Drivers not found.
A WLAN or LAN adapter may have been installed on your PC
already. You may be looking for the drivers in the wrong
installation path.
ì Enter the path name for the drivers manually. The drivers
are stored in
CD-ROM:\Installation\Gigaset USB Adapter 300\Driver
The Gigaset WLAN Adapter Monitor or the device driver were
not installed correctly or the device has been deactivated in the
Gigaset WLAN
Adapter Monitor
icon does not appear device manager.
in the taskbar.
ì First check in the device manager on the control panel
whether the device exists and has been activated. If not,
activate it. If it is not there, uninstall the software and
install it again as described in the section entitled "Install-
ing the Gigaset USB Adapter 300" on page 11.
The PC does
The Gigaset USB Adapter 300 is not connected correctly.
not recognise the
Gigaset USB Adapter
300.
ì Remove the Gigaset USB Adapter 300 or the USB cable
from the USB port and insert it again.
ì Check in the device manager of the Windows operating
system whether the USB slot is activated. If not, activate it.
The WPS registration Access control via a mac address filter is activated on the access
cannot be estab-
lished.
point.
ì Enter the PC in the mac address filter on the access point
and then start the WPS registration. You will find further
information in the user manual for your access point.
46
Appendix
Problem
Causes and remedies
If you cannot establish a connection between your PC with the
The connection is
not set up at all or is Gigaset USB Adapter 300 and another wireless network
not set up correctly. adapter, this may be due to a number of reasons:
The PC you want to connect to has not been powered up.
ì Power up the PC.
The transmission speed set does not match that of the partners
in the network.
ì Check whether you have set a particular transmission
speed. If this is the case, change to "Auto" (infrastructure
mode).
You are working in an ad-hoc network and a different radio
channel is being used.
ì Select the correct radio channel.
The wrong mode has been set (infrastructure or ad-hoc mode).
ì Select the correct mode.
The SSIDs of the devices that are to communicate with each
other do not match.
ì Make sure that all connection partners with network adapt-
ers use the same SSID for wireless operation.
Different encryption methods are used.
ì Select the same encryption method on all devices.
Changes in the configuration are not applied by your PC
ì Reboot your PC.
The IP address or the subnet mask is configured incorrectly.
ì Make sure that the IP address and the subnet mask are con-
figured correctly on the IP Settings tab.
As a rule, it is necessary to assign static IP addresses when
operating a network in ad-hoc mode.
47
Appendix
Problem
Causes and remedies
The connection qual- ì Increase the distance between your
ity is poor or there is
interference.
Gigaset USB Adapter 300 and the device causing the
interference.
ì Make sure that the PC on which the Gigaset USB Adapter
300 is installed and the device causing the interference are
connected to the power supply via different sockets.
ì Do not place your PC with the Gigaset USB Adapter 300
near microwave devices or devices with wireless video-
audio transmission, e.g. room monitors such as baby
alarms, or near large metal objects.
ì A wireless network in the neighbourhood may be using the
same channel. Change the radio channel for all the wire-
less devices within your network.
ì Align the antenna at the access point.
ì Choose another place for your PC.
It takes a long time to Depending on the environment and the devices, setting up a
set up a connection. connection may take a while.
ì Click Scan on the Site Monitor tab or double-click the net-
work in question.
You cannot establish If you cannot establish a connection between your Gigaset USB
a connection to the
access point.
Adapter 300 and an access point, try one or more of the follow-
ing:
ì Make sure that the physical connection of the access point
operates reliably.
ì Make sure that the same SSID is used for the Gigaset USB
Adapter 300 and the access point.
ì Check whether the security settings configured for the
Gigaset USB Adapter 300 match those for the access point,
e.g. the same key for WEP encryption.
ì Check whether your access to the access point is blocked by
other security measures, e.g. by a MAC filter or filter for IP
addresses.
ì Make sure that the IP address and the subnet mask are con-
figured correctly on the IP Settings tab.
As a rule, it is necessary to assign dynamic IP addresses
when operating a network in infrastructure mode.
48
Appendix
Problem
Causes and remedies
Installation
cancels under
Windows 2000.
If the following error message appears during Gigaset USB
Adapter 300 installation on the Windows 2000 operating sys-
tem: “1608: Unable to create InstallDriver instance” and the
installation is cancelled, this is due to the fact that the Micro-
soft Network Client component is missing.
To install the Microsoft Network Client:
ì Select Start – Settings – Control Panel – Network and
Dial-up Connections.
ì Right-click LAN Connection and select Properties.
ì Then click the following: Install – Client – Add – Client for
Microsoft Networks – OK.
The Microsoft Network Client component is now installed.
ì Restart your PC to apply the change.
ì Install the software, see the section entitled "Installing the
Gigaset USB Adapter 300" on page 11.
The data transfer
rate seems too low.
ì If possible, position your PC with the Gigaset USB Adapter
300 closer to the access point or remove any obstacles in
the line of sight.
ì Re-align the antennae on the access point.
essary.
ì You have to change the transmission mode of the Gigaset
USB Adapter 300 to 802.11g.
ì Try another channel. Make sure that you change the chan-
nel setting on the access point first.
The Gigaset USB
Adapter 300 does
not work properly.
You have checked all of the causes specified above and still no
communication is possible.
ì Uninstall the software and install it again as described in
the sections entitled "Uninstalling the Gigaset USB Adapter
300" on page 44 and "Installing the Gigaset USB Adapter
300" on page 11.
49
Appendix
Problem
Causes and remedies
The transmission
rate is too low. For
example, there are
pixel errors with
video streaming.
Radio data transmission depends on the operating environ-
ment, for example the building stock or the influence of other
devices in the vicinity that also transmit in the 2.4-GHz fre-
quency range.
ì Arrange your WLAN devices closer together.
ì Change the orientation of your Gigaset USB Adapter 300,
for example by using the delivered stand.
ì Change the orientation of the access point.
ì Position the device elsewhere.
ì Switch off other radio sources in the vicinity. They may
interfere with data transmission.
ì Choose a different channel. You will find further informa-
tion in the user guide for your access point.
ì Check to see if the problem also arises with a different type
of encryption.
Specifications
The specifications are subject to change.
Software
Compliance with
standards
IEEE 802.11b/802.11g/802.11n (draft, see page 7)
Network modes
Ad-hoc mode
Infrastructure mode
Security properties
Support of SSID network identification for security
Support of data encryption using the
WEP algorithm (64-bit/128-bit)
WPA-PSK and WPA2-PSK encryption
Authentication with WPA
Wi-Fi Protected Setup (WPS)
Adjustment of transmission power
Further security settings in conjunction with routers (filter for
MAC addresses, firewall, etc.)
Configuration and
monitoring
Monitor for configuration and monitoring
Dynamic configuration
2 LED displays for operation and transmission states
Supported operating
systems
Windows Vista, Windows XP or Windows 2000
50
Appendix
Hardware
Interface
USB V2.0, backward compatible with USB V1.1
Wireless properties
Frequency range
Spreading
2,400 to 2,4835 GHz
Direct Sequence Spread Spectrum (DSSS)
CCK, OFDM
Modulation
Number of channels
IEEE 802.11b: 13 (Europe, ETSI)
IEEE 802.11g: 13 (Europe, ETSI)
IEEE 802.11n: 13 (Europe, ETSI)
Transmission rate
IEEE 802.11b: up to 11 Mbps
IEEE 802.11g: up to 54 Mbps
IEEE 802.11n: up to 300 Mbps
Antenna
2 internal antennae
Antenna output power < 100 mW
Requirements for the operating environment
Temperature
Operating temperature: 0°C to +55°C
Storage temperature: -20°C to +70°C
Humidity
5 % to 90% (non condensing)
Compliance with security CE, EN 60950
conditions and
regulations
Authorisation
This device is intended for use worldwide. Use outside the European Economic Area
(with the exception of Switzerland) is subject to national approval.
In France, this device is only intended for internal use within buildings.
Country-specific requirements have been taken into consideration.
We, Gigaset Communications GmbH, declare that this device meets the essential
requirements and other relevant regulations laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address:
51
Appendix
Approval
United Kingdom
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is
covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent
potential negative consequences for the environment and human health. It is a precon-
dition for reuse and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact your
local council refuse centre or the original supplier of the product.
Ireland
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is
covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent
potential negative consequences for the environment and human health. It is a precon-
dition for reuse and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.
Service (Customer Care)
We offer you support that is fast and tailored to your specific needs!
Our Online Support on the Internet can be reached any time from anywhere.
It provides you with 24/7 support for all our products. It also provides a list of FAQs and
answers plus user guides and current software updates (if available for the product) for
you to download.
You will also find frequently asked questions and answers in the appendix of this user
guide.
For personal advice on our range of products and assistance with repairs or guarantee/
warranty claims you can contact us on:
UK helpdesk: 0 84 53 67 08 12.
Ireland 18 50 77 72 77.
Please have your proof of purchase ready when calling with regard to guarantee/war-
ranty claims.
Replacement or repair services are not offered in countries where our product is not sold
by authorised dealers.
52
Glossary
Glossary
Access point
An access point such as the Gigaset SE366 WLAN is the central element in a wireless
local network (WLAN). It handles connection of the wireless-linked network compo-
nents and regulates data traffic in the wireless network. The access point also serves as
an interface to other networks, for example an existing Encryption LAN or via a modem
to the Internet. The network mode for wireless networks with an access point is called
Infrastructure mode.
Ad-hoc mode
Ad-hoc mode describes wireless local networks (WLAN) in which the network compo-
nents set up a spontaneous network without an access point, e.g. several notebooks in
a conference. All the network components are peers. They must be equipped with a
wireless network adapter.
AES
Advanced Encryption Standard
AES is an encryption system that was published as a standard in October 2000 by the
National Institute of Standards and Technology (NIST). It is used for WPA encryption. A
distinction is made between the three AES variants AES-128, AES-192 and AES-256 on
the basis of their key lengths.
Authentication
Authentication checks the true identity of a PC on the basis of a particular property.
Bridge
A bridge connects several network segments to form a joint network, e.g. to make a TCP/
IP network. The segments can have different physical properties, for example different
connections such as Ethernet and wireless LANs. Linking individual segments via
bridges makes it possible to build local networks of practically unlimited size.
See also Gateway, Hub, Router, Switch
DHCP
Dynamic Host Configuration Protocol
DHCP handles the automatic assignment of IP addresses to network components. It was
developed because in large networks – especially the Internet – the defining of IP
addresses is very complex as participants frequently move, drop out or new ones join.
A DHCP server automatically assigns the connected network components (DHCP clients)
dynamic addresses from a defined IP address pool, thus saving a great deal of configu-
ration work. In addition, the address blocks can be used more effectively: Since not all
participants are on the network at the same time, the same IP address can be assigned
to different network components in succession as and when required.
The Gigaset routers include a DHCP server and can automatically assign IP addresses for
the PCs in their local network.
53
Glossary
DHCP server
See DHCP
DNS
Domain Name System
DNS permits the assignment of IP addresses to PC or domain names, which are easier to
remember. A DNS server must administer this information for each LAN with an Internet
connection. As soon as a page on the Internet is called up, the browser obtains the cor-
responding IP address from the DNS server so that it can establish the connection.
On the Internet, the assignment of domain names to IP addresses follows a hierarchical
system. A local PC only knows the address of the local DNS server. This in turn knows all
the addresses of the PCs in the local network and the next higher DNS server, which
again knows addresses in its network and that of higher DNS servers.
DNS server
See DNS
Domain name
The domain name is the reference to one or more web servers on the Internet
(e.g. gigaset.com). The domain name is mapped via the DNS service to the correspond-
ing IP address.
DSL
Digital Subscriber Line
DSL is a data transmission technology in which a connection to the Internet can be
run at up to 1.5 Mbps over normal telephone lines. A DSL connection is supplied by an
Internet provider. It requires a DSL modem.
Dynamic IP address
A dynamic IP address is assigned to a network component automatically via DHCP. This
certain intervals.
See also Static IP address
Encryption
Encryption is used to protect confidential information against unauthorised access.
With an encryption system, data packets can be sent securely over a network.
Ethernet
Ethernet is a network technology for local networks (LANs) defined by the IEEE as
standard IEEE 802.3. Ethernet uses a baseband cable with a transmission rate of 10 or
100 Mbps.
54
Glossary
Gateway
A gateway is a device used to connect networks with completely different architectures
(addressing, protocols, application interfaces, etc.). Although it is not totally correct, the
term is also used as a synonym for router.
See also Bridge, Hub, Router, Switch
Hub
A hub connects several network components in a star-topology network by sending all
the data it receives from one network component to all the other network components.
See also Bridge, Gateway, Router, Switch
IEEE
Institute of Electrical and Electronics Engineers
IEEE is an international body that defines network standards, especially to standardise
LAN technologies, transmission protocols and speeds, and wiring.
IEEE 802.11
IEEE 802.11 is a standard for wireless LANs. In infrastructure mode, end devices can be
connected to a base station (access point) or connect with each other spontaneously
(ad-hoc mode).
Infrastructure mode
Infrastructure mode is a way of operating wireless local networks (WLAN), in which an
access point handles the data traffic. Network components cannot establish a direct
connection with each other as is the case in ad-hoc mode.
Internet
The Internet is a wide-area network (WAN) linking several million users around the
world. A number of protocols have been created for exchanging data; these are known
collectively under the name TCP/IP. All participants on the Internet can be identified by
an IP address. Servers are addressed by a domain name (e.g. gigaset.com). Domain
names are assigned to IP addresses by the Domain Name System (DNS).
Among the most important Internet services are:
u
u
u
u
electronic mail (email)
the World Wide Web (WWW)
file transfer (FTP)
discussion forums (Usenet / Newsgroups)
Internet Service Provider
An Internet Service Provider offers access to the Internet for a fee.
55
Glossary
IP
Internet Protocol
The IP protocol is one of the TCP/IP protocols. It is responsible for addressing parties in a
network using IP addresses, and routes data from the sender to the recipient. It decides
the paths along which the data packets travel from the sender to the recipient in a com-
plex network (routing).
IP address
An IP address is a network-wide unique address for a network component in a network
based on the TCP/IP protocol (e.g. in a local network (LAN) or on the Internet). The IP
address has four parts (values from 0 to 255) separated by periods (e.g. 192.168.2.1).
The IP address consists of the network address and the PC address. Depending on the
subnet mask, one, two or three parts form the network address, the remainder the PC
address. You can find out the IP address of your PC by entering ipconfigin the com-
mand prompt.
IP addresses can be assigned manually (see Static IP address) or automatically
(see Dynamic IP address).
On the Internet, domain names are normally used instead of IP addresses. DNS is
responsible for assigning domain names to IP addresses.
ISP
Internet provider, see Internet Service Provider
LAN
Local Area Network
A local area network links network components so that they can exchange data and
share resources. The physical range is restricted to a particular area (e.g. a company
site). As a rule users and operators are identical. A local network can be connected to
other local networks or a wide-area network (WAN) such as the Internet.
MAC address
Media Access Control address
The MAC address is used for the globally unique identification of a network adapter. It
comprises six parts (hexadecimal numbers), e.g. 00-90-96-34-00-1A. The MAC address
is assigned by the network adapter manufacturer. You can find out the MAC address of
your PC by entering the ipconfig /allcommand in the "physical address" entry at
the prompt.
Mbps
Megabits per second / millions of bits per second (MBit/s)
Mbps is a unit that can be used to describe the speed of data transmission in a network.
56
Glossary
Network
A network is a group of devices connected in wired or wireless mode so that they can
share resources such as data and peripherals. A general distinction is made between
local area networks (LAN) and wide area networks (WAN).
Network adapter
The network adapter is the hardware device that implements the connection of a net-
work component to a local network. The connection can be wired or wireless. An Ether-
net network card is an example of a wired network adapter. The Gigaset USB Adapter
300 is an examples of a wireless network adapter.
A network adapter has a unique address, the MAC address.
Protocol
rules for opening, administering and closing a connection, for data formats, time
frames and error handling. The TCP/IP protocols are an example of protocols used for
communication within a network.
RC4
RC4 is an encryption algorithm on which WEP and TKIP encryption are based. Special
features of this algorithm are a secret key and variable key length.
Roaming
Roaming extends the range of a wireless LAN with several Access points that use the
same SSID and the same radio channel and are linked via Encryption. The PCs in the net-
work can switch dynamically between several access points without losing the existing
network connection.
Router
A router directs data packets from one local network (LAN) to another via the fastest
route. A router makes it possible to connect networks that have different network tech-
nologies. For example, it can link a local network via Encryption or WLAN technology to
the Internet.
See also: Bridge, Switch, Hub, Gateway
SSID
Service Set Identifier
The SSID is used to identify the stations in a wireless network (WLAN). All wireless net-
work components with the same SSID form a common network. The SSID can be
assigned by the network operator.
Static IP address
A static IP address is assigned to a network component manually during network con-
figuration. Unlike a Dynamic IP address, a static IP address never changes.
57
Glossary
Subnet
A subnet divides a network into smaller units.
Subnet mask
The subnet mask determines how many parts of a PC's IP address represent the network
address and how many parts represent the PC address.
The subnet mask in a network administered by the Gigaset SE366 WLAN is always
255.255.255.0. That means the first three parts of the IP address form the network
address and only the final part is used to assign PC addresses. The first three parts of the
IP addresses of all network components are in this case always the same.
Switch
Like a hub, a switch is an element that links different network segments or components.
Unlike a hub, however, the switch has its own intelligence that enables it to forward
packets only to the subnet or network component for which they are intended.
See also Bridge, Gateway, Hub, Router
TKIP
Temporal Key Integrity Protocol
TKIP is a further development of WEP encryption. Like WEP, TKIP encryption is based on
the RC4 encryption algorithm. However, TKIP generates new keys after every 10-kbyte
packet, thus meeting higher security requirements.
UDP
User Datagram Protocol
UDP is a protocol from the TCP/IP protocol family that handles data transport between
two communication partners (applications). Unlike TCP, UDP is a non-session based pro-
tocol. It does not establish a static connection. The data packets, called datagrams, are
sent as a broadcast. The recipient alone is responsible for making sure the data is
received. The sender is not notified about whether or not it is received.
WAN
Wide Area Network
A WAN is a wide area network, which is not restricted to one particular area. The Internet
is the most frequently used WAN. A WAN is run by one or more public providers to ena-
ble private access. You access the Internet via an Internet provider.
WEP
Wired Equivalent Privacy
WEP is a security protocol defined in the IEEE 802.11 standard. It is used to protect wire-
less transmission in a WLAN against unauthorised access through WAN of the data
transmitted.
Wireless network
See WLAN
58
Glossary
WLAN
Wireless LAN
Wireless LANs enable network components to communicate with a network using radio
waves as the transport medium. A wireless LAN can be connected as an extension to an
existing wired LAN or it can form the basis for a new network. The basic element of a
wireless network is the radio cell. This is the area in which wireless communication takes
place. A WLAN can be operated in ad-hoc mode or infrastructure mode.
WLAN is currently specified in standard IEEE 802.11. The Gigaset USB Adapter 300 com-
plies with the 802.11n standard.
WPA
WPA was developed to improve the security provided by WEP. WPA uses more complex
procedures to generate keys, such as TKIP (Temporal Key Integrity Protocol). In addition,
WPA can use an authentication server (e.g. a RADIUS server) to increase security.
WPA2-PSK/WPA-PSK
WPA Pre-shared Key
Variant of WPA data encryption in which new keys are automatically generated at regu-
lar intervals by means of a keyword (Pre-Shared Key). The key is updated after defined
periods (Roaming). WPA2-PSK offers even higher security than WPA-PSK.
WPS
Wi-Fi Protected Setup
WPS considerably simplifies the setting up of wireless networks.
WPS automatically establishes secure wireless networks. Access points automatically
create a network identification (SSID) and WPA2-PSK/WPA-PSK encryption. Clients can
be connected alternatively by entering a PIN or via special registration buttons on the
access point and on the client.
59
Index
Index
Numerics
128-bit . . . . . . . . . . . . . . . . . . . . . . . 34
A
Access point . . . . . . . . . . . . . . . . . . . . 8
auto connect . . . . . . . . . . . . . . . . . 16
establish connection . . . . . . . . . . . 25
general . . . . . . . . . . . . . . . . . . . . . 53
Adapter Monitor . . . . . . . . . . . . . . . . 19
Ad-hoc mode. . . . . . . . . . . . . . 8, 29, 53
Ad-hoc network
basic principles. . . . . . . . . . . . . . . . . 8
peer-to-peer connections . . . . . . . . . 8
ASCII . . . . . . . . . . . . . . . . . . . . . . . . . 34
Authentication . . . . . . . . . . . . . . . . . 53
Authentication server . . . . . . . . . . . . 31
WPA . . . . . . . . . . . . . . . . . . . . . . . . 31
Authorisation . . . . . . . . . . . . . . . . . . 51
D
Device driver updating . . . . . . . . . . . . 45
DHCP . . . . . . . . . . . . . . . . . . . . . . 40, 53
Driver software . . . . . . . . . . . . . . . . . 11
installing. . . . . . . . . . . . . . . . . . . . . 15
E
B
Bridge . . . . . . . . . . . . . . . . . . . . . . . . 53
Broadcast . . . . . . . . . . . . . . . . . . . . . 53
Buttons . . . . . . . . . . . . . . . . . . . . . . . 20
C
Closing the program . . . . . . . . . . . . . 21
Configuration . . . . . . . . . . . . . . . 19, 21
About tab. . . . . . . . . . . . . . . . . . . . 43
display menu . . . . . . . . . . . . . . . . . 19
general . . . . . . . . . . . . . . . . . . . . . 27
IP settings tab. . . . . . . . . . . . . . . . . 39
profile . . . . . . . . . . . . . . . . . . . . . . 35
registration mode. . . . . . . . . . . . . . 21
security . . . . . . . . . . . . . . . . . . . . . 31
Site Monitor tab . . . . . . . . . . . . . . . 41
Status tab. . . . . . . . . . . . . . . . . . . . 37
Connection
F
G
Gigaset USB Adapter 300
configuring. . . . . . . . . . . . . . . . . . . 19
installing. . . . . . . . . . . . . . . . . . . . . 12
uninstalling . . . . . . . . . . . . . . . . . . 44
Gigaset WLAN Adapter Monitor
general . . . . . . . . . . . . . . . . . . . . . . 19
installation . . . . . . . . . . . . . . . . . . . 11
setting up automatically. . . . . . . . . 16
setting up manually . . . . . . . . . . . . 42
Connection partner
access point . . . . . . . . . . . . . . . . . . . 8
auto connect . . . . . . . . . . . . . . . . . 16
H
HEX . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Hub . . . . . . . . . . . . . . . . . . . . . . . . . . 55
60
Index
I
IEEE. . . . . . . . . . . . . . . . . . . . . . . . . . 55
IEEE 802.11b. . . . . . . . . . . . . . . . . . . 55
IEEE 802.11g. . . . . . . . . . . . . . . . . . . 55
IEEE 802.11n. . . . . . . . . . . . . . . . . . . 55
Infrastructure mode. . . . . . . . . . . . 8, 55
Infrastructure network. . . . . . . . . . . . . 8
Installation . . . . . . . . . . . . . . . . . . . . 11
checking . . . . . . . . . . . . . . . . . . . . 16
Installing the software. . . . . . . . . . . . 11
InstallShield Wizard . . . . . . . . . . . . . . 12
Internet . . . . . . . . . . . . . . . . . . . . . . . 55
Internet Service Provider . . . . . . . . . . 55
IP address . . . . . . . . . . . . . . . . . . . . . 56
dynamic. . . . . . . . . . . . . . . . . . . . . 54
of PC in the WLAN . . . . . . . . . . . . . 40
releasing . . . . . . . . . . . . . . . . . . . . 40
renewing . . . . . . . . . . . . . . . . . . . . 40
IP settings . . . . . . . . . . . . . . . . . . . . . 39
O
P
Peer-to-peer connections . . . . . . . . . . . 8
PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
creating . . . . . . . . . . . . . . . . . . . . . 35
deleting . . . . . . . . . . . . . . . . . . . . . 36
Q
QuickInfo for the connection . . . . . . . 17
K
Key length . . . . . . . . . . . . . . . . . . . . . 34
Key type . . . . . . . . . . . . . . . . . . . . . . 34
R
Radio mode
L
deactivating . . . . . . . . . . . . . . . . . . 20
RC4 . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Without PIN (Apply) . . . . . . . . . . . . 22
without PIN (apply). . . . . . . . . . . . . 22
Roaming . . . . . . . . . . . . . . . . . . . . 8, 57
Router . . . . . . . . . . . . . . . . . . . . . . . . 57
LAN. . . . . . . . . . . . . . . . . . . . . . . . . . 56
basic principles. . . . . . . . . . . . . . . . . 7
LED display . . . . . . . . . . . . . . . . . . . . 18
Local area network, see LAN
Location . . . . . . . . . . . . . . . . . . . . . . 15
M
MAC address . . . . . . . . . . . . . . . . 40, 57
Mbps. . . . . . . . . . . . . . . . . . . . . . . . . 56
Monitor . . . . . . . . . . . . . . . . . . . . . . . 19
exiting . . . . . . . . . . . . . . . . . . . . . . 21
N
Network . . . . . . . . . . . . . . . . . . . . . . 57
authentication server . . . . . . . . . . . 31
Network adapter . . . . . . . . . . . . . . . . 57
configuring . . . . . . . . . . . . . . . . . . 19
LED display. . . . . . . . . . . . . . . . . . . 18
pack contents. . . . . . . . . . . . . . . . . 11
system requirements . . . . . . . . . . . 11
S
Safety precautions . . . . . . . . . . . . . . . . 5
secure operation. . . . . . . . . . . . . . . . 5
Scope of delivery . . . . . . . . . . . . . . . . 11
Secure operation . . . . . . . . . . . . . . . . . 5
61
Index
Security. . . . . . . . . . . . . . . . . . . . . . . 31
deactivated . . . . . . . . . . . . . . . . . . 31
in the wireless network . . . . . . . . . . 9
WEP encryption . . . . . . . . . . . . . . . 33
WPA-PSK encryption. . . . . . . . . 32, 35
Service . . . . . . . . . . . . . . . . . . . . . . . 52
Site Monitor. . . . . . . . . . . . . . . . . . . . 41
creating the list . . . . . . . . . . . . . . . 41
Specifications . . . . . . . . . . . . . . . . . . 50
SSID. . . . . . . . . . . . . . . . . . . . 10, 28, 57
Stand. . . . . . . . . . . . . . . . . . . . . . . . . 14
Standards
Technical data . . . . . . . . . . . . . . . . . . 50
U
IEEE 802.11b . . . . . . . . . . . . . . . . . 55
IEEE 802.11g . . . . . . . . . . . . . . . . . 55
IEEE 802.11n . . . . . . . . . . . . . . . . . 55
Static IP address. . . . . . . . . . . . . . . . . 55
Status . . . . . . . . . . . . . . . . . . . . . . . . 37
Status indicator . . . . . . . . . . . . . . . . . 18
Subnet. . . . . . . . . . . . . . . . . . . . . . . . 58
Subnet mask . . . . . . . . . . . . . . . . . . . 58
Switch . . . . . . . . . . . . . . . . . . . . . . . . 58
System requirements. . . . . . . . . . . . . 11
free hard disk space . . . . . . . . . . . . 11
operating system . . . . . . . . . . . . . . 11
working memory . . . . . . . . . . . . . . 11
W
WEP . . . . . . . . . . . . . . . . . . . . . . . 33, 58
encryption . . . . . . . . . . . . . . . . . . . . 9
Wi-Fi Protected Setup see WPS
WPS . . . . . . . . . . . . . . . . . . . . . . . 10, 59
connection to access point . . . . . . . 25
registration with PIN . . . . . . . . . . . . 10
registration with push button . . . . . 10
WPS button . . . . . . . . . . . . . . . . . . . . 22
T
Tab
About. . . . . . . . . . . . . . . . . . . . . . . 43
Configuration – General. . . . . . . . . 27
Configuration – Profile . . . . . . . . . . 35
Configuration - Security . . . . . . . . . 31
IP settings . . . . . . . . . . . . . . . . . . . 39
Site Monitor . . . . . . . . . . . . . . . . . . 41
Status. . . . . . . . . . . . . . . . . . . . . . . 37
62
Index
63
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved. Subject to availability.
Rights of modification reserved.
A31008-M1066-R101-2x-7619
|