F I R E RO D® I M M E R S I O N
Compact Unit Gives
Versatility in
Designing a Heating
System
FIREROD® immersion heaters package up to 300 W/in2
(46.5 W/cm2) in a compact unit, giving you greater versatility
in designing your heating system. This design solution is ideal
for replacing large screw-plug immersion heaters.
Features and Benefits
Nickel-chromium resistance wire
• Precisely centered in the unit assures even, efficient
distribution of heat to the sheath
Magnesium oxide insulation
• Compacted to the proper density, results in high dielectric
strength and contributes to faster heat-up
Incoloy® sheath
Aside from its versatile design, these heaters come complete
with a brass 3⁄4 (19 mm) NPT double threaded screw plug,
which allows you to add conduit boxes. Also, FIREROD
immersion heaters are sealed at the lead end with a silicone
rubber seal. Solid copper leads, with silicone rubber sleeve,
are provided for unconfined wiring. These units are
recommended for immersion in water or 90+ percent water
soluble solutions.
• Resists corrosion from water
Metallurgically-bonded conductor pins
• Ensures a trouble-free electrical continuity
Lead end with silicone rubber seal
• Protects the heater against moisture contamination
Performance Capabilities
Optional stainless steel fittings
• Available for use in corrosive applications
• Maximum operating temperature in water to 100OC (212OF)
at 14.7 psi
Horizontal through the wall tank mounting
• Makes setup faster
• Maximum watt density to 300 W/in2 (46.5 W/cm2)
240 and 480VÅ(ac)
• Maximum voltage to 480VÅ(ac)
• Provides wiring flexibility
Applications
Stock availability
• Same day shipment on various 5⁄8 in. diameter heaters with
• Plastic reclamation
• Food preparation
• Lab equipment
3
⁄
4
in. NPT
Nickel-Chromium
Resistance Wire
Incoloy®
Sheath
Magnesium
Oxide Insulation
STL-FRI-0505
Double Threaded Brass
12001 Lackland Road
3
3
⁄4
in. NPT - 1 ⁄8 in. long*
St. Louis, Missouri 63146 USA
Phone: +1 (314) 878-4600
FAX: +1 (314) 878-6814
e-mail: info@watlow.com
6 in. (150 mm) Solid Pins
with Silicone Rubber Boots
5
3
*Standard on ⁄
8
and ⁄4 in. diameter heaters.
Incoloy is a registered trademark of Special Metals Corporation.
© 2005 Watlow Electric Manufacturing Company
|
Taylor Scale 3847BL User Manual
Techno Source Video Games 21500 User Manual
TERK Technologies Radio Antenna TOWER User Manual
Thermaltake Computer Hardware CLP0538 User Manual
Trane Air Conditioner TCONT800AS11AA User Manual
Transcend Information Camera Accessories TS1GSDG User Manual
Trion Air Cleaner Modular Filterpac Media Air Cleaner User Manual
Tripp Lite Power Supply TMU Series User Manual
Vector Mobility Scooter 167662 R0700A User Manual
Viking Outdoor Storage AD1620T User Manual