Techno Source Handheld Game System 20700 User Manual

No. 20700/20705  
5. Using the stylus fill in the grid by first touching the number at the bottom of the screen to  
be selected and then touching the box within the grid to place it. The blinking triangular  
tab points out the last entry made in the grid. Please note that in the BEGINNER mode  
any number that has been placed in an incorrect box will continue to flash to let you know  
that it is in the wrong place.  
SCREEN  
TM  
+
8
6. To CLEAR an entry, touch the C at the top of the screen and then touch the box on the  
grid to be cleared. A new number can now be entered in that box using the same steps as  
above.You can also directly place a new number in a filled box without clearing the  
previous number by touching a new number and then touching the box.  
OPERATING INSTRUCTIONS  
7. Once each of the numbers 1 through 9 has been placed correctly, the number will  
BATTERY INSTALLATION (battery included)  
• Unscrew the battery cover with a Phillips screwdriver.  
• Insert 1 button cell battery (CR2032) with the positive (+)  
and negative (-) ends facing in the proper direction as  
indicated in the battery compartment. (see Fig. 1)  
• Replace the cover.  
disappear from the bottom of the screen. If the numbers have all been placed correctly, a sound effect will be  
heard. If no sound effect is heard then one or more numbers have been placed incorrectly.  
8. The time clock at the top of the screen keeps track of the time it takes to complete the puzzle.  
9. Pause the game by touching the PAUSE icon  
touch the PAUSE icon again.  
located on the upper right of the screen. To continue playing  
+
10. After 4 minutes without play, the game will turn off automatically. Touch the screen anywhere and hold for 2-5  
seconds with the stylus to resume the game. Please note that when the game resumes it will be in the PAUSE  
SAFETY BATTERY USAGE  
• Do not use rechargeable batteries in this product.  
• Non-rechargeable batteries are not to be recharged.  
• Only batteries of the same or equivalent type as recommended are to be used.  
• Batteries are to be inserted with the correct polarity.  
• Exhausted batteries are to be removed from the product.  
• The supply terminals are not to be short-circuited.  
• Do not dispose the batteries in fire, batteries may leak or explode.  
• Batteries should be replaced by an adult.  
mode. Touch the PAUSE icon  
to continue playing.  
Fig. 1  
11. The screen contrast can be adjusted by first touching the PAUSE icon  
at the top of the screen. The  
numbers 1 through 9 will appear on the bottom of the screen. 1 is the lightest and 9 is the darkest. Touch the  
number to set the desired contrast.  
12. Turn the sound on and off by touching the SOUND icon  
located on the upper right of the screen.  
13. At any time during the game, the answer to the puzzle can be viewed for 5 seconds by touching ANS located  
on the upper left of the screen. This feature can only be used 3 times in BEGINNER mode and 3 times in  
ADVANCED mode during the course of a puzzle.  
14. When the player completes the puzzle, DONE will be displayed onscreen. Touch the screen anywhere with  
the stylus to return to the main menu.  
• Please keep details for future reference.  
CAUTION  
• Adults should replace batteries.  
• Not suitable for children under 3.  
• May contain small parts.  
15. RESET the game by activating the pinhole RESET button located on the back of the product.  
• Do not dispose of batteries in fire; batteries may explode or leak.  
This product contains glass, which may cause injury if broken.  
Sudoku Solver  
1. Solve any puzzle from your favorite source with the NEW Sudoku Solver! To begin, slide the switch from the  
OFF position and choose either BEGINNER or ADVANCED mode.  
CARING FOR YOUR DEVICE  
2.You will be able to choose between two options: PLAY (1) or SOLVE (2). Using the stylus, touch the number 2  
on the bottom left side of the screen to input and solve a Sudoku puzzle.  
• If the display becomes dim or malfunctions, replace the batteries.  
• After replacing batteries, switch to BEG or ADV to ensure proper functioning.  
(In most cases, game malfunctions are due to weak batteries.)  
3.The screen will then change to a blank 9 x 9 grid. Using the stylus, fill in the grid by first touching the number  
at the bottom of the screen you wish to select and then touching the box within the grid to place it.  
4. Once you fill in all the numbers from the puzzle you want to solve, touch DONE at the top of the screen  
with the stylus.  
5.The screen will then display“SOLVED”and give you a choice between two options: DONE or ANS.  
NOTE: Before touching DONE with the stylus, ensure that the inputted numbers are in the correct  
arrangement. If the numbers are placed in the incorrect boxes, the Solver will display“UNSOLVED”on  
the screen because it violates the logical constraints of the puzzle.  
• In an environment with electrostatic discharge, the product may malfunction and lose memory. In this  
case switch OFF and then turn to BEG or ADV.  
• If the product malfunctions after switching to BEG or ADV, use the tip of the stylus to activate the  
pinhole RESET button located on the back of the product to reset the game or simply switch to OFF  
and back to BEG or ADV.  
GAME PLAY  
• If you touch DONE with the stylus, you can play the puzzle you just entered on your Sudoku unit.Touch  
ANS anytime during game play with the stylus to view a five-second flashing hint of the solution.  
• If you touch ANS with the stylus, you can view the completed Sudoku puzzle.  
Stylus slot  
OBJECT:  
FILL IN THE GRID SO THAT EVERY ROW, EVERY COLUMN AND  
EVERY 3 X 3 BOX CONTAINS THE NUMBERS 1 THROUGH 9.  
Please note that this game is based on puzzles which have only one solution. Thus, there may be  
times toward the end of a puzzle where two different options for placing numbers are technically  
acceptable, but only one version is accepted as being correct by this handheld game.  
1. To begin slide the switch from the OFF position and choose either BEGINNER or  
ADVANCED mode.  
2.You will be able to choose between two options: PLAY (1) or SOLVE (2). Using the  
stylus, touch the number 1 on the bottom left side of the screen to play a Sudoku puzzle.  
3. Using the stylus, select Level 1, 2, 3 or 4 by touching the numbers 1, 2, 3 or 4 on the  
bottom left side of the screen. 1 is easiest and 4 is the most difficult.  
4. Once the selection has been made, a puzzle will appear on the screen. The amount of  
fixed numbers appearing on the grid is determined by the level selected. Fixed numbers  
are marked with a triangular tab. The higher the level the less fixed numbers appear.  
 
Due to the varying reliability of Sudoku puzzle sources, there is a remote possibility that  
the Sudoku Solver will be unable to solve the inputted puzzle.  
Product specifications and colors may vary.  
©2005 Techno Source.  
All Rights Reserved.  
Questions? Comments?  
30 Canton Road, Kowloon,Hong Kong  
1
TM  
Visit our website at:  
MADE IN CHINA  
IM-20700B  

Tatung Indoor Furnishings TRK 172 User Manual
Technicolor Thomson Portable Radio RT234L User Manual
Timex Watch W254 User Manual
Toastmaster Hot Beverage Maker TMK17CAN User Manual
Toshiba Air Conditioner RAV SM1103UT E User Manual
Toshiba MP3 Player SD V394 User Manual
Tricity Bendix Cooktop CSE500 User Manual
Vermont Casting Gas Heater VCBV30TN VCBV30TP VCBV20TN VCBV20TP VCBV10TN VCBV10TP VCPV30TN VCPV30YP VCPV18TN VCPV18TP VCPV10TN VCPV10TP User Manual
Victor Technology Calculator 909 User Manual
Vivotek Security Camera IP3133 User Manual