Sony Stereo System CDP CX225 User Manual

3-866-297-11 (1)  
Operating Instructions  
f
CDP-CX225  
1999 by Sony Corporation  
 
TABLE OF CONTENTS  
Getting Started  
Unpacking ............................................................................................................................ 4  
Hooking Up the System ..................................................................................................... 4  
Inserting CDs ....................................................................................................................... 6  
Playing a CD ................................................................................................................ 8  
Playing CDs  
Locating a Specific Disc ................................................................................................... 10  
Specifying the Next Disc to Play .................................................................................... 10  
Locating a Specific Track or a Point in a Track ............................................................ 11  
Playing Repeatedly ........................................................................................................... 12  
Playing in Random Order (Shuffle Play) ...................................................................... 12  
Creating Your Own Program (Program Play) .............................................................. 13  
Playing Discs in a Group (Block Play) ........................................................................... 15  
Additional Information  
Precautions ........................................................................................................................ 16  
Notes on CDs ..................................................................................................................... 16  
Troubleshooting ................................................................................................................ 17  
Specifications ..................................................................................................................... 17  
Index ............................................................................................................................ 18  
3
 
Ge t t in g St a rt e d  
Unpacking  
Hooking Up the System  
Check that you received the following items:  
• Audio cord (1)  
• Remote commander (remote) (1)  
• Size AA (R6) batteries (2)  
Overview  
This section describes how to hook up the CD player to  
an amplifier. Be sure to turn off the power of each  
component before making the connections.  
• CD booklet holders (2) and label (1)  
DIGITAL OUT  
(OPTICAL)  
COMMAND  
MODE  
How to use the CD booklet holder  
CONTROL A1  
The CD booklet holder helps you locate the disc easily.  
After you have inserted discs into the player, you can put  
the CD booklet (which comes with a CD) into the  
supplied holder. Put two CD booklets facing back to back  
into a pocket. Stick the number label on each pocket,  
matching the number of the disc slot where you have  
inserted the disc. You can put up to 200 CD booklets into  
the holders.  
CD player  
To an AC outlet  
Inserting batteries into the remote  
To line output (R)  
To audio input  
: Signal flow  
You can control the player using the supplied remote.  
Insert two size AA (R6) batteries by matching the +  
and – on the batteries to the diagram inside the battery  
compartment.  
Insert the negative (–) end first, then push in and down  
until the positive (+) end clicks into position.  
When using the remote, point it at the remote sensor g  
on the player.  
To line output (L)  
Amplifier  
To an AC outlet  
What cords will I need?  
Audio cord (1) (supplied)  
When to replace batteries  
With normal use, the batteries should last for about six  
months. When the remote no longer operates the player,  
replace all the batteries with new ones.  
White  
(L)  
White  
(L)  
Red  
(R)  
Red  
(R)  
Notes  
Do not leave the remote near an extremely hot or humid  
place.  
Do not drop any foreign object into the remote casing,  
particularly when replacing the batteries.  
Do not expose the remote sensor to direct sunlight or  
lighting apparatuses. Doing so may cause a malfunction.  
If you do not use the remote for an extended period of time,  
remove the batteries to avoid possible damage from battery  
leakage and corrosion.  
4
 
Ge t t in g St a rt e d  
Hookups  
When to use the COMMAND MODE selector  
The COMMAND MODE selector is set to CD1 at the  
factory for normal use. You can control this player by  
connecting to a Sony CD Player with the player control  
function, via the CONTROL A1 jacks. When making  
this connection, set the COMMAND MODE selectors of  
each player to the appropriate position according to the  
connected line input jacks. For details, refer to the  
instructions supplied with the connected player.  
When connecting the audio cord, be sure to match the  
color-coded cord to the appropriate jacks on the  
components: Red (right) to Red and White (left) to  
White. Be sure to make connections firmly to avoid  
hum and noise.  
CD player  
Amplifier  
LINE OUT  
INPUT  
CD  
L
COMMAND MODE  
L
CD  
R
R
1
2
3
• If you have a digital component such as a digital  
amplifier, D/A converter, DAT or MD  
Connect the component via the DIGITAL OUT (OPTICAL)  
connector using an optical cable (not supplied). Take off the  
cap and plug in the optical cable.  
When using another Sony CD player together with  
this player  
You can make the supplied remote effective only for this  
player.  
POC-15  
When using the player equipped with the  
COMMAND MODE selector:  
Optical cable (not supplied)  
Set the COMMAND MODE selector of this player to  
CD1 and that of another player to CD2 or CD3. Then  
set the CD1/ 2/ 3 switch on the remote supplied for  
each player accordingly.  
Digital component  
CD player  
DIGITAL OUT  
DIGITAL INPUT  
OPTICAL  
OPTICAL  
When using the player not equipped with the  
COMMAND MODE selector:  
The command mode of the player without the  
COMMAND MODE selector is set to CD1. Set the  
COMMAND MODE selector of this player to CD2, and  
set the CD1/ 2/ 3 switch on the remote to CD2.  
Note  
When you connect via the DIGITAL OUT (OPTICAL)  
connector, noise may occur when you play CD software  
other than music, such as a CD-ROM.  
Connecting the AC power cord  
Connect the AC power cord to a wall outlet.  
• If you have a Sony receiver (amplifier) equipped with  
the CONTROL A1 jack  
Be sure to connect the player to the CD IN jacks on the  
receiver (amplifier). When making this connection, set the  
COMMAND MODE of the player to CD1 (see the  
illustration below). If you further connect the player and  
the receiver (amplifier) via the CONTROL A1 jacks with  
the monaural (2P) mini-plug cord (not supplied), you can  
use the Auto Function feature between these components.  
For details, refer to the supplementary “CONTROL-A1  
Control System” instructions and the instructions supplied  
with the receiver (amplifier).  
Note on placement  
Be sure to place the player on a horizontal place.  
If the player is slanted, it may cause malfunction or  
damage the player.  
5
 
Ge t t in g St a rt e d  
The disc number at the loading position appears in  
the display.* As you turn the JOG dial, the disc  
number changes.  
Inserting CDs  
You can insert up to 200 discs into this player.  
ALL DISCS  
1
2
3
4
5
6
7
8
POWER  
Front cover OPEN  
JOG  
d1SC  
2 0  
CD 1  
Disc number  
You can arrange your discs into groups and play  
them within a certain group using the Block Play  
function. When using this function, you have to  
insert discs into the slots assigned to one of the  
eight groups. For details, see “Playing Discs in a  
Group” on page 15.  
POR  
* If you have already inserted discs, the disc number at  
the playing position appears. When you turn the JOG  
dial, the displayed disc number changes to the one at  
the loading position.  
Playing position  
Rotary table  
4
Insert a disc with the label side facing right.  
Loading position  
Notes  
Make sure you have inserted the disc into each slot at  
a right angle to the rotary table. If the disc is not put  
in straight, it may damage the player or the disc.  
Make sure the rotary table comes to a complete stop  
before inserting or removing discs.  
1
2
Press POWER to turn on the player.  
Press OPEN.  
Front  
cover  
3
Turn the JOG dial until you find the disc slot  
where you want to insert a disc, while checking the  
disc number (written beside every five slots and  
also indicated in the display).  
With the label side facing right  
5
Repeat Steps 3 and 4 to insert more discs.  
Disc number  
Disc slot at the loading  
position  
6
 
Ge t t in g St a rt e d  
6
Close the front cover by pressing the right edge of  
the cover until it clicks.  
The rotary table turns and the disc slot at the  
loading position is set to the playing position.  
Always close the front cover except when you  
insert or remove discs.  
The supplied CD booklet holders help you locate a  
disc  
You can store up to 200 CD booklets. Insert booklets and  
stick the number label on the film of a pocket and the  
booklet so that you can locate the disc easily.  
Notes  
When you insert an 8 cm (3-inch) CD, be sure to attach a  
Sony CSA-8 adaptor (not supplied) to the disc.  
Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It  
may damage the player.  
Do not attach anything such as seals or sleeves to CDs. It may  
damage the player or the disc.  
If you drop a disc into the player and the CD wont go into  
the slot correctly, consult your nearest Sony dealer.  
When transporting the player, remove all discs from the  
player.  
Removing CDs  
After following Steps 1 to 3 of “Inserting CDs” on page  
6, remove the discs. Then close the front cover.  
Note  
The disc being played does not come to the loading position if  
you open the front cover during playback. (The disc number  
flashes in the display.)  
If you want to remove the disc being played, press ENTER in  
the center of the JOG dial after opening the front cover. The  
disc comes to the loading position. Remove the disc after the  
rotary table comes to a complete stop.  
7
 
Ba sic Op e ra t io n s  
Pla yin g a CD  
2 3  
4 5  
ENTER  
ENTER  
AMS  
CONTINUE SHUFFLE PROGRAM REPEAT  
POWER  
CHECK  
CLEAR  
BLOCK  
1
BLOCK  
2
BLOCK  
3
BLOCK  
4
OPEN  
BLOCK  
5
BLOCK  
6
BLOCK  
7
BLOCK  
8
See pages 4 – 5 for the hookup  
Turn on the amplifier and select the CD player position.  
Press POWER to turn on the player.  
information.  
1
2
3
Make sure you have inserted the  
discs correctly as indicated on  
page 6.  
You can play all the tracks on a  
disc in the original order  
(Continuous Play). You can also  
play up to 200 discs  
Press CONTINUE to select ALL DISCS or 1 DISC Continuous  
Play mode.  
Each time you press CONTINUE, “ALL DISCS” or “1 DISC”  
appears in the display.  
consecutively.  
You can turn on the player  
by pressing POWER on the  
remote Z  
When you select  
The player plays  
ALL DISCS  
All discs in the player consecutively in the order of  
disc number. Empty disc slots are skipped.  
1 DISC  
Only one disc you have selected  
Turn the JOG dial until the disc number you want appears in  
the display to select the first disc (ALL DISCS) or the disc you  
want (1 DISC).  
4
ALL DISCS  
1
2
3
4
5
6
7
8
d1SC  
2 0  
CD 1  
8
 
Ba sic Op e ra t io n s  
Press ENTER to start playing.  
The selected disc is set to the playing position, and the player  
plays all the discs from the selected one (ALL DISCS) or all the  
tracks once (1 DISC).  
5
Adjust the volume on the amplifier.  
When you turn off the player  
by pressing the POWER  
switch (standby mode)  
The player remembers the  
last playing disc and the  
play mode (Continuous,  
Shuffle (see page 12) or  
Program (see page 13)).  
When you turn on the  
Display information w hile playing a disc  
While playing a disc, the display shows the current disc number, track  
number, playing time of the track and the next disc number.  
Next disc number  
Current disc number  
ALL DISCS  
DISC  
1
2
3
4
5
6
7
8
TRACK  
NEXTDISC  
MIN  
SEC  
player again, therefore, the  
player plays the same disc in  
the same play mode. Note  
that the player does not  
remember this information,  
if you turn off the player by  
pressing the power switch of  
the amplifier or receiver  
while the AC power cord is  
connected to the switched  
AC outlet of the amplifier or  
receiver.  
20 1  
0 28 57  
CD 1  
Current track number  
Playing time of the track  
To stop playback  
Press p.  
≠/± ENTER  
OPEN  
ENTER  
AMS  
CONTINUE SHUFFLE PROGRAM REPEAT  
POWER  
CHECK  
CLEAR  
BLOCK  
BLOCK  
1
5
BLOCK  
BLOCK  
2
6
BLOCK  
BLOCK  
3
7
BLOCK  
BLOCK  
4
8
OPEN  
·
P
p
To  
Press  
P
Pause  
Resume playing after pause  
Go to the next disc  
P or ·  
DISC SKIP + once.  
Hold down the button to skip discs.  
Go back to the preceding disc  
Go to the next track  
DISC SKIP – once.  
Hold down the button to skip discs.  
±
Go back to the preceding track  
Stop playing and remove the disc  
OPEN and then ENTER. The disc comes  
to the loading position.  
9
 
Pla yin g CDs  
Locating a Specific Disc  
Specifying the Next Disc to  
Play  
ENTER  
JOG  
You can specify the next disc to play while playing a  
disc in Continuous or 1 DISC Shuffle Play mode.  
While playing a disc, turn the JOG dial until the disc  
number you want appears in the display.  
POWER  
Next disc number  
ALL DISCS  
1
2
3
4
5
6
7
8
DISC  
TRACK  
NEXTDISC  
MIN  
SEC  
20 1  
0 28 38  
CD 1  
After the current disc is played, the next disc you have  
specified starts playing.  
If you want to skip to the next disc right away, press  
ENTER while playing the current disc.  
DISC  
To cancel the disc you have specified  
Press CONTINUE twice.  
Number  
buttons  
ENTER  
Selecting a disc on the player  
Turn the JOG dial until the disc number you want  
appears in the display. Press ENTER to start play.  
Selecting a disc directly using the remote  
1
Press DISC.  
2
Press the number button of the disc.  
Example: To enter number 35  
Press 3, then 5.  
To enter number 100  
Press 1, then 0 twice.  
3
Press ENTER to start play.  
10  
 
Pla yin g CDs  
To locate  
Press  
Locating a Specific Track or a  
Point in a Track  
the next or  
succeeding tracks  
± repeatedly until you find the  
track  
the current or  
repeatedly until you find the  
You can quickly locate any track while playing a disc  
using the ≠/± (AMS: Automatic Music Sensor)  
buttons or number buttons on the remote. You can also  
locate a specific point in a track while playing a disc.  
preceding tracks  
track  
a specific track  
directly Z  
TRACK, the number button of the  
track, and then ENTER. When you  
locate a track with a number over 10,  
press the 10s digit first, then the 1s  
digit.  
a point in a track  
) (forward) or 0 (backward) and  
while monitoring the hold down until you find the point  
sound Z  
POWER  
a point in a track  
) (forward) or 0 (backward) and  
quickly by observing hold down until you find the point  
the display Z  
during pause. You will not hear the  
sound during the operation.  
≠/±  
Note  
If “  
” appears in the display, the disc has reached the end  
while you were pressing ). Press 0 or to go back.  
TRACK  
Number  
buttons  
ENTER  
=/+  
0/)  
11  
 
Pla yin g CDs  
Playing Repeatedly  
Playing in Random Order  
(Shuffle Play)  
You can play discs/ tracks repeatedly in any play  
mode.  
You can have the player “shuffle” the tracks and play  
in random order. The player shuffles all the tracks on  
all discs or on the disc you specified.  
REPEAT  
·
ENTER  
JOG  
SHUFFLE  
POWER  
POWER  
Press REPEAT while playing a disc.  
“REPEAT” appears in the display. The player repeats  
the discs/ tracks as follows:  
1
Press SHUFFLE to select ALL DISCS or 1 DISC  
Shuffle Play mode.  
Each time you press SHUFFLE, “ALL DISCS” or  
“1 DISC” appears in the display.  
When the disc is played in  
The player repeats  
ALL DISCS Continuous Play  
(page 8)  
All tracks on all discs  
1 DISC Continuous Play  
(page 8)  
All tracks on the current disc  
When you select  
The player plays  
ALL DISCS  
All tracks on all discs in  
random order. The player  
keeps shuffling tracks until  
you stop playback.*  
ALL DISCS Shuffle Play  
(page 12)  
The player does not repeat  
discs/ tracks but keeps  
shuffling until you stop  
playback whether or not you  
press REPEAT.  
1 DISC  
All tracks on the specific disc  
in random order  
1 DISC Shuffle Play  
(page 12)  
All tracks on the current disc  
in random order  
* The player may play the same track more than once.  
Program Play (page 13)  
The same program  
2
3
When you want to specify the disc for 1 DISC  
Shuffle Play, turn the JOG dial until the disc  
number you want appears in the display.  
To cancel Repeat Play  
Press REPEAT repeatedly until “REPEAT” disappears from  
Press ENTER or ·.  
ALL DISCS or 1 DISC Shuffle Play starts.  
the display.  
” appears in the display while the player is  
“shuffling” the discs or the tracks.  
Repeating the current track  
You can repeat only the current track.  
To cancel Shuffle Play  
Press CONTINUE.  
While the track you want is being played, press  
REPEAT repeatedly until “REPEAT 1” appears in the  
display.  
You can start Shuffle Play while playing  
Press SHUFFLE, and Shuffle Play starts from the current  
track.  
12  
 
Pla yin g CDs  
2
3
Turn the JOG dial until the disc number you want  
appears in the display.  
You can directly select a disc for 1 DISC Shuffle Play  
See “Selecting a disc directly using the remote” on page 10.  
1
2
3
4
5
6
7
8
DISC  
TRACK  
STEP  
You can go to the next disc during 1 DISC Shuffle Play  
Press DISC SKIP +.  
20 AL  
1
PROGRAM  
CD 1  
Disc number  
You can specify the next disc to play during 1 DISC  
Shuffle Play  
To program a whole disc, skip this step. Press  
≠/± until the track number you want  
appears in the display.  
Turn the JOG dial to specify the next disc. After all the  
tracks on the current disc are played in random order,  
the next disc starts playing. If you want to skip to the  
next disc right away, press ENTER while playing the  
current disc.  
1
2
3
4
5
6
7
8
DISC  
TRACK  
STEP  
20 1  
1
PROGRAM  
CD 1  
Note  
Track number  
You cannot specify the next disc to play during ALL DISCS  
Shuffle Play.  
4
Press ENTER or PROGRAM.  
The track being programmed  
Creating Your Own Program  
(Program Play)  
1
2
3
4
5
6
7
8
DISC  
TRACK  
STEP  
20 1  
1
PROGRAM  
CD 1  
You can arrange the order of the tracks and/ or discs to  
create your own program and the program is stored  
automatically. A program can contain up to 32 “steps”  
— one “step” may contain a track or a whole disc.  
You can make a program using the controls on the  
remote as well as the ones on the player. However, the  
programming procedures are different.  
Playing order  
The disc being  
programmed  
5
6
To program other discs/ tracks, do the following:  
To program  
Repeat Steps  
2 and 4  
All tracks of another disc(s)  
Other tracks on the same disc  
Other tracks on other discs  
3 and 4  
2 to 4  
Creating a program on the player  
PROGRAM  
≠/±  
JOG  
ENTER  
Press · to start Program Play.  
To cancel Program Play  
Press CONTINUE.  
POWER  
The program remains even after Program Play ends  
When you press ·, you can play the same program  
again.  
·
CLEAR  
CHECK  
When you press PROGRAM during Continuous or  
Shuffle Play  
1
Press PROGRAM.  
The program will be played after the current track.  
If a program is already stored, the last step of the  
program appears in the display. When you want to  
erase the whole program, hold down CLEAR until  
“All Clr” appears in the display (see page 14).  
The program remains until you erase them  
If you replace discs, the programmed disc and track  
numbers remain. So, the player plays only the existing  
disc and track numbers. However, the disc and track  
numbers that are not found in the player or on the disc  
are deleted from the program, and the rest of the  
program is played in the programmed order.  
13  
 
Pla yin g CDs  
Creating a program using the remote  
Checking the programmed order  
You can check your program before or after you start  
playing.  
Press CHECK.  
PROGRAM  
Each time you press this button, the display shows the  
disc and track number of each step in the programmed  
order. (When a whole disc is programmed as one step,  
“AL” appears instead of the track number.) After the  
last step in the program, the display shows “End” and  
returns to the original display.  
TRACK  
DISC  
Number  
buttons  
ENTER  
CLEAR  
CHECK  
Changing the programmed order  
·
You can change your program before you start playing.  
1
2
3
4
Press PROGRAM.  
Press DISC.  
To  
You need to  
Erase a track or disc  
Press CHECK until the track or  
disc you want to erase appears in  
the display, then press CLEAR  
Press the number button of the disc.  
Erase the last track or  
disc in the program  
Press CLEAR. Each time you  
press the button, the last track or  
disc will be cleared.  
To program a whole disc, skip this step and go to  
Step 6. Press TRACK.  
Add tracks or discs to the  
end of the program  
Follow the programming  
procedure  
5
Press the number button of the track.  
Erase the whole program Hold down CLEAR until “All  
completely  
Clr” appears in the display to  
erase the whole program, then  
create a new program following  
the programming procedure  
6
7
Press ENTER.  
To program other discs/ tracks, do the following:  
To program  
Repeat Steps  
2, 3 and 6  
4 to 6  
All tracks of another disc(s)  
Other tracks on the same disc  
Other tracks on other discs  
Erasing the program stored in memory  
1
Press PROGRAM in the stop mode.  
2 to 6  
2
Hold down CLEAR until ”All Clr” appears in the  
display.  
8
Press · to start Program Play.  
To cancel Program Play  
Press CONTINUE.  
14  
 
Pla yin g CDs  
1
2
Insert discs into the slot of the block you want,  
referring to the table. (See also “Inserting CDs” on  
page 6.)  
Playing Discs in a Group  
(Block Play)  
Press one of the BLOCK 1–8 buttons to select the  
block.  
When using the remote, press BLOCK, the number  
button of the block you want, then ENTER.  
The block number appears in the display.  
You can classify discs in advance by artists, category,  
etc. when inserting discs into the slots, and play them  
only within the group (called “block”) you specified.  
The player has eight blocks, and each slot is assigned to  
one of the blocks as shown below.  
3
Press ·.  
Block number  
Disc slot  
1–25  
Block Play starts from the disc which is the most  
upward number within a block and located closest  
to the playing position.  
1
2
3
4
5
6
7
8
26–50  
51–75  
You can start Block Play from the disc you want  
When you want to start Block Play from the disc you  
want, turn the JOG dial to select the disc, then press  
ENTER.  
76–100  
101–125  
126–150  
151–175  
176–200  
To cancel Block Play  
Press the corresponding BLOCK 1–8 button.  
You can enjoy Continuous, Shuffle or Repeat Play  
within a certain block.  
Note  
The block number does not appear if no disc is put into the  
block you specified.  
POWER  
BLOCK 1–8  
·
BLOCK  
ENTER  
Number  
buttons  
·
15  
 
Ad d it io n a l In fo rm a t io n  
On transportation  
When transporting the player, press OPEN then remove all  
Precautions  
the discs from the player and turn the power off.  
On safety  
If you have any questions or problems concerning your  
player, please consult your nearest Sony dealer.  
Caution — The use of optical instruments with this product  
will increase eye hazard.  
Should any solid object or liquid fall into the cabinet,  
unplug the player and have it checked by qualified  
personnel before operating it any further.  
Notes on CDs  
On power sources  
On handling CDs  
Before operating the player, check that the operating  
voltage of the player is identical with your local power  
supply. The operating voltage is indicated on the nameplate  
at the rear of the player.  
To keep the disc clean, handle the disc carefully.  
Do not stick paper or tape on the disc.  
The player is not disconnected from the AC power source  
(mains) as long as it is connected to the wall outlet, even if  
the player itself has been turned off.  
If you are not going to use the player for a long time, be  
sure to disconnect the player from the wall outlet. To  
disconnect the AC power cord (mains lead), grasp the plug  
itself; never pull the cord.  
Do not expose the disc to direct sunlight or heat sources  
such as hot air ducts, nor leave it in a car parked in direct  
sunlight as there can be considerable rise in temperature  
inside the car.  
AC power cord must be changed only at the qualified  
service shop.  
On placement  
After removing a disc from the disc slot, store the disc in its  
case.  
Place the player in a location with adequate ventilation to  
prevent heat build-up in the player.  
Do not place the player on a soft surface such as a rug that  
might block the ventilation holes on the bottom.  
Do not place the player in a location near heat sources, or in  
a place subject to direct sunlight, excessive dust or  
mechanical shock.  
On cleaning  
Before playing, clean the disc with a cleaning cloth. Wipe  
the disc from the center out.  
On operation  
If the player is brought directly from a cold to a warm  
location, or is placed in a very damp room, moisture may  
condense on the lenses inside the player. Should this occur,  
the player may not operate properly. In this case, leave the  
player turned on for about an hour until the moisture  
evaporates.  
Do not use solvents such as benzine, thinner, commercially  
available cleaners or anti-static spray intended for vinyl  
LPs.  
On adjusting volume  
Do not turn up the volume while listening to a portion with  
very low level inputs or no audio signals. If you do, the  
speakers may be damaged when a peak level portion is  
played.  
On cleaning  
Clean the cabinet, panel and controls with a soft cloth  
slightly moistened with a mild detergent solution. Do not  
use any type of abrasive pad, scouring powder or solvent  
such as alcohol or benzine.  
16  
 
Ad d it io n a l In fo rm a t io n  
Troubleshooting  
Specifications  
If you experience any of the following difficulties while  
using the player, use this troubleshooting guide to help  
you remedy the problem. Should any problem persist,  
consult your nearest Sony dealer.  
Compact disc player  
Laser  
Semiconductor laser (λ = 780 nm)  
Emission duration: continuous  
Laser output  
Max 44.6 µW*  
* This output is the value measured at  
a distance of 200 mm from the  
objective lens surface on the Optical  
Pick-up block with 7 mm aperture.  
There is no sound.  
/Check that the player is connected securely.  
/Make sure you operate the amplifier correctly.  
Frequency response  
Signal-to-noise ratio  
Dynamic range  
20 Hz to 20 kHz ± 0.5 dB  
More than 100 dB  
More than 98 dB  
The CD does not play.  
/There is no CD in a slot (“–no dISC–” appears).  
Insert a CD.  
/Insert the CD with the label side facing right.  
/Clean the CD (see page 16).  
/Moisture has condensed inside the player. Press  
OPEN and leave the player turned on for about  
an hour (see page 16).  
Harmonic distortion  
Channel separation  
Less than 0.0045%  
More than 95 dB  
Outputs  
Load impedance  
Jack  
type  
Maximum  
output  
level  
The remote does not function.  
/Remove obstacles in the path of the remote and  
the player.  
Over 10 kilohms  
Phono  
2 V  
LINE OUT  
jacks  
(at 50 kilohms)  
/Point the remote at the remote sensor g on the  
player.  
/Replace all the batteries in the remote with new  
ones if they are weak.  
Wave length: 660 nm  
Optical  
output  
connector  
–18 dBm  
DIGITAL OUT  
(OPTICAL)  
/Set the CD1/ 2/ 3 switch on the remote  
according to the position of the COMMAND  
MODE selector displayed in the front panel  
display (see page 5).  
General  
Power requirements  
Power consumption  
120 V AC, 60 Hz  
13 W  
The player functions incorrectly.  
Dimensions (approx.)  
(w/h/d)  
When the front cover is closed  
430 × 200 × 480 mm (17 × 7 7/ 8 × 19 in.)  
incl. projecting parts  
When the front cover is open  
430 × 200 × 600 mm (17 × 7 7/ 8 × 23 5/ 8  
in.) incl. projecting parts  
/The microcomputer chips may be operating  
incorrectly. Disconnect the AC power cord, then  
connect it back to the wall outlet to reset the  
player.  
Mass (approx.)  
9.0 kg (19 lbs 14 oz)  
Supplied accessories  
Audio cord (2 phono plugs – 2 phono plugs) (1)  
Remote commander (remote) (1)  
Size AA (R6) batteries (2)  
CD booklet holders (2)  
Label (1)  
Design and specifications are subject to change without notice.  
17  
 
In d e x  
Names of controls  
S
T
Index  
Searching. See Locating  
Selecting a disc 10  
Shuffle Play  
on all discs 12  
on one disc 12  
Bu t t o n s  
BLOCK 15  
BLOCK 1–8 15  
CHECK 14  
CLEAR 14  
A
AMS 11  
Specifying the next disc 10  
Automatic Music Sensor 11.  
CONTINUE  
DISC 10  
8
B
Troubleshooting 17  
DISC SKIP  
9
Block Play 15  
ENTER  
Number 11  
OPEN  
PROGRAM 13  
REPEAT 12  
SHUFFLE 12  
TRACK 11  
9
U, V, W, X, Y, Z  
C, D  
6
Unpacking  
4
Connecting  
4
Continuous Play  
8
E, F, G  
≠/±  
9
Erasing  
programs 14  
·
P
p
9
9
9
H
I
0/) 11  
Handling CDs 16  
Hookups  
Sw it ch e s  
overview  
4
CD1/ 2/ 3  
POWER  
5
6
Inserting CDs  
6
Ja cks  
CONTROL A1  
LINE OUT  
5
J, K  
5
JOG dial  
6
Co n n e ct o rs  
L, M, N O  
DIGITAL OUT (OPTICAL)  
5
Locating  
a specific point 11  
a specific track 11  
by monitoring 11  
by observing the display 11  
directly 11  
Ot h e rs  
COMMAND MODE selector  
5
Disc slots  
Display  
Front cover  
6
9
6
discs 10  
JOG dial 6, 8  
Rotary table  
using AMS 11  
6
g
4
P, Q  
Playback  
Block Play 15  
Continuous Play  
Program Play 13  
Repeat Play 12  
Shuffle Play 12  
8
Program  
changing 14  
checking 14  
erasing 14  
R
Remote control  
Repeating 12  
4
Rotary table  
6
18  
 
 
Sony Corporation Printed in Malaysia  
 

SIIG Computer Drive 04 0399B User Manual
SIIG Surge Protector 04 0568A User Manual
Snapper Snow Blower SS5220E User Manual
Sony Camcorder Accessories HDC 900 User Manual
Sony Flat Panel Television 4 109 032 111 User Manual
Sony Stereo Receiver 3 875 815 111 User Manual
Standard Horizon Marine Radio GX3500S User Manual
Star Trac Home Gym Shoulder Press User Manual
Sunpentown Intl Air Conditioner WA 1400E User Manual
Sylvania DVD Player SDVD9001 BLACK User Manual