Oricom Amplified Phone TP30 User Manual

TP30  
Amplified Speakerphone  
User Guide  
Please keep this user guide for future reference.  
 
Table of contents  
General Information ...............................................................2  
Installation.............................................................................4  
Wall Mounting........................................................................5  
Location of controls ...............................................................6  
Basic settings........................................................................8  
Operation...............................................................................9  
The Phone Book...................................................................13  
Memory...............................................................................15  
Caller ID............................................................................... 17  
1
 
General Information  
General Information  
It is very important that you read the User Guide  
carefully as it contains detailed information on  
installation, programming and operational issues which  
you will need to be aware of to ensure the Phone  
operates properly. Following is a list of some of the  
important issues and warnings which you need to be  
aware of.  
WARNING  
This is a summary of the important issues you must  
still read the User Guide in full.  
• The telephone is designed for indoor use only. Do not  
install the telephone in areas where there is the risk  
of an explosion, excessive exposure to smoke, dust,  
vibrations, chemicals, moisture and heat.  
• Do not use your telephone during an electrical  
thunderstorm as it is possible to get an electric  
shock. Refer to information contained in Telstra White  
pages directory.  
• The earpiece of the handset may attract small metal  
objects such as staples and pins. Care should be  
taken when placing the handset near these items.  
• Do not install in damp locations such as a bathroom  
or laundry, do not expose the unit to direct sunlight.  
• This phone is designed for connection to a PSTN  
telephone line or an analogue extension port of a  
PBX system. If you connect this device to a digital  
extension of a PBX, damage may result to the PBX.  
N13134  
The A-Tick symbol indicates that this product complies with all current  
Australian ACMA standards.  
2
 
General Information  
Notes for operation in New Zealand  
The grant of a Telepermit for any item of terminal equipment indicates  
only that Telecom has accepted that the item complies with the minimum  
conditions for connection to its network. It indicates no endorsement  
of the product by Telecom, nor does it provide any sort of warranty.  
Above all, it provides no assurance that any item will work correctly in  
all respects with another item of Telepermitted equipment of a different  
make or model, nor does it imply that any product is compatible with all  
of Telecom’s network services.  
This equipment shall not be set to make automatic calls to the Telecom  
“111” Emergency Service.  
This equipment may not provide for the effective hand-over of a call to  
another device connected to the same line.  
This equipment should not be used under any circumstances that may  
constitute a nuisance to other Telecom Customers.  
REN (RN for New Zealand)  
The REN (Ringer Equivalence Number) or (RN) is of significance only if you  
wish to connect more than 1 telephone to your telephone line. A standard  
telephone line has a maximum REN capacity of 3 (RN of 5). It is possible  
to connect 3 devices with a REN of 1 (RN of 1) with no degradation to the  
product’s performance. Exceeding this limit may cause the volume of the  
ringer in any phone to decrease or not ring at all.  
3
 
Installation  
Installation  
Installing batteries (supplied) in the phone  
Warnings  
Before opening the battery compartment, make sure the telephone  
is disconnected from the telephone line.  
You must install 4 AAA Alkaline batteries (supplied) in the phone  
base to retain memory and CID information when the telephone  
is disconnected from the line.  
1. Use a flat-blade screwdriver or tip of a pen to lift and remove the  
battery compartment door.  
2. Insert four AAA batteries into the compartment as indicated by the  
polarity symbols.  
3. Snap the battery compartment door back into place.  
When this  
symbol appears on the display or the display dims, replace  
the batteries. Always use 4 new high quality Alkaline AAA batteries.  
If you have a Broadband line  
If you connect your telephone to a line with a broadband connection, you  
must connect an in line filter (not supplied) between the telephone socket and  
your phone base to ensure that your broadband and TP30 will work properly.  
If you do not install the filter you will experience interference on the  
cordless phone and your Broadband may suffer dropouts. Please refer to  
the user guide of the in line filter for installation.  
In a home with broadband, every telephone, fax or answering system  
must have a in-line filter connected, not just the one at the telephone  
point that your modem is connected to.  
Additional in-line filters can purchase from electronic stores.  
Connecting the telephone  
1. Plug one end of the curly cord into the socket on the handset.  
2. Plug the other end of the curly cord into the left side of the phone.  
3. Plug one end of the telephone line cord into the jack at the back of the  
base, and the orher end into the wall socket.  
4. Pick up the handset and listen for dial tone.  
4
 
Wall Mounting  
Wall Mounting  
Desk Mounting  
Fit the bracket as shown in the illustration. Insert the brackets three tabs  
into the matching slots on the bottom of the phone and click into place.  
Bracket postion for  
desk mounting  
Caution: Before installing or changing  
the battery, make sure that the  
telephone is not connected to the  
telephone network or the mains power.  
Made in China  
Wall Mounting  
1. Fit the bracket as shown in the illustration. Insert the braqckets three tabs  
into the matching slots on the bottom of the phone and click into place.  
Bracket postion for  
wall mounting  
2. Drill two holes vertically, one above the other, 83mm apart, and leave  
the screws protruding from the wall by 5mm.  
3. Turn around the handset hook (located by the hook switch) by 180  
degress, so it will hold the handset in place when the phone is  
mounted on the wall.  
4. Position the mounting holes on the base of the phone over the two  
protruding screws on the wall plate or on the wall. Gently push the  
phone flush against the wall plate then slide the phone downwards  
locking it into place.  
5
 
Location of controls  
19  
18  
17  
16  
15  
1
2
CALL BACK  
DELETE/OK  
14  
MEM  
CID  
13  
12  
11  
MUTE  
20  
10  
M1  
M2  
M3  
M4  
9
MUTE  
3
8
STORE  
RECALL  
REDIAL  
4
5
6
7
21  
6
 
Location of controls  
22  
RINGER  
HI LOW OFF  
RECALL  
600/100  
MW  
V-/V+/HV/RINGERV  
23  
24  
25  
26  
27  
28  
REC VOL  
SPK VOL  
1. Hook switch  
15.  
/
Buttons  
2. Handset hook  
3. Mute button  
16. DELETE/OK button  
17. Call back button  
4. Store button  
18. Display  
5. Recall button  
6. Redial button  
19. Ring LED indicator  
20. Mute button (on handset)  
21. Curly cord socket  
22. Message Indicator  
23. Ringer Hi/Low/Off switch  
24. Recall 600/100 switch  
25. MW V-/V+/HV/Ringer switch  
26. Telephone line socket  
27. Receiver volume  
7. Speakerphone button  
8. Keypad  
9. Memory buttons (M1, 2, 3, 4)  
10. Memory paper card  
11. MEM button  
12. Caller ID button  
13. Phonebook button  
14. Message button  
28. Speaker volume  
7
 
Basic settings  
Basic settings  
1. After installing the batteries, the display should flash the word  
ENGLISH.  
If not press and hold for approximately 4 seconds.  
2. Select the desired language using or . Press DELETE/OK button.  
3. Select the desired contrast setting (2=Default) using or .  
Press DELETE/OK button.  
4. Set the month using or . Press DELETE/OK button.  
5. Set the day using or . Press DELETE/OK button.  
6. Set the hour (00-23) using or . Press DELETE/OK button.  
7. Set the minute using or . Press DELETE/OK button.  
Display(LCD)Contrast/Time Setting  
If you wish to change the language, contrast, time settings at a later date,  
press and hold button for approximately 4 seconds and repeat steps 2-7  
above.  
Select country version  
1. For New Zealand Select Recall = 600 on the switch on the rear side of  
the unit, New Zealand Recall/flash time is 600ms, the unit is now set  
up to insert 0/00 when receiving CID log in accordance with Telecom  
NZ requirements. Or for Australia Select Recall = 100.  
2. Lift and replace the handset to initialize.  
NOTE:  
If the switch is in the incorrect position Caller ID and the recall function  
will not operate correctly.  
8
 
Operation  
Operation  
When the telephone is not in use, the date and time, number of new and  
total number of calls STORED in the Caller ID MEM will be shown in the  
display. The display will show the caller number (and name if available).  
Making a call  
1. Pick up the handset or press  
wait for a dial tone.  
button (the speaker LED will light) and  
2. Dial the number you wish to call. The display will show the number that  
you are dialling. If you dial a number over 14 digits long, it will show  
the last 14 digits only.  
3. When you have completed your call, hang up the handset or press  
button again to release the telephone line.  
It is possible to switch from a handset to speakerphone conversation  
by pressing the  
accordingly.  
button and picking up or hanging up the handset  
Pre Dialing a Call  
1. Dial the number you wish to call. To correct a number press the  
DELETE/OK button for each incorrect digit.  
2. Pick up the handset or press the  
button.  
Receiving a Call  
When you receive a call, the telephone rings, the Ringer LED flashes,  
and the display shows the CALL# and the callers telephone number (with  
caller id service activated).  
This feature allows you to decide to pick up the phone or not depending  
on who is calling.  
9
 
Operation  
If you want to talk to the caller:  
1. Pick up the handset or press  
button to answer the call.  
2. At the end of the call, return the handset to the cradle or press  
.
Redial function  
The last number dialled will be saved in the telephone automatically. To use  
the redial facility, proceed as follows:  
1. Lift the handset or press  
button .  
2. Press the REDIAL button. The last saved redial number will now be dialled.  
Pause  
If needed for phone banking or behind a PBX system, you can insert a 3.6  
second pause while dialing or storing a number into MEM. Press REDIAL  
button at the desired point in number to insert a pause.  
Recall and call waiting  
Press the Recall button followed by the extension number to transfer  
calls when connected to a PBX (TBR only).  
Access to additional network services can be gained by using the Recall  
button, * and # keys. Contact your network operator for more information.  
The recall button timing can be switched between either 100ms (AUS) /  
600ms (NZ), using the Recall switch located on the rear side of the handset.  
To Turn on Telstra call waiting (Australia)  
You can use the recall button to answer a second call while you are on  
the phone. However this service will need to be turned on. For example to  
turn on Telstra's Call Waiting service:  
1. Lift the handset and wait for dial tone then Press *43#.  
2. You will hear the service message and then hang up.  
10  
 
Operation  
Take two different calls at the same time  
During a call, you will hear two loud beeps periodically to notify you of  
another incoming call. If you wish to answer this call  
1. Press Recall button listen for dial tone then Press 2 to put the current  
call on hold and talk with the second caller.  
2. Subsequent presses of Recall button listen for dial tone then Press 2  
will toggle you between these 2 callers.  
Ringer Volume Control  
The ringer sound level can be adjusted by sliding the RINGER switch.  
Select high (HI) or soft (LOW) sound level. When you do not want to be  
disturbed, slide the RINGER switch to the OFF position.  
The bright Red light (LED) on the base will flash with all incoming calls.  
Volume Control  
Speaker Volume Control  
You can adjust the speaker volume level that suits you by sliding the SPK  
VOL switch.  
Handset Receiver volume control  
You can adjust the handset receiver volume level that suits you by sliding  
the REC VOL switch.  
Mute  
If you wish to speak privately to someone else in the room without your caller  
overhearing, press and hold the MUTE button on the underside of the handset.  
you will still be able to hear the callers but they cannot hear you during  
the mute operation. To resume normal conversation, release the button.  
11  
 
Operation  
Message Waiting Indicator  
Some PBX systems have a function called Message Waiting. On the back  
of the telephone is a switch marked (MW/V-/V+/HV/RINGER), this is used  
to select one of the following options: LED+, LED-, Visual Ring Indicator  
( select one of the following options: LED+, LED-, Visual Ring Indicator)  
and high voltage (HV).  
By selecting the appropriate option for your system the telephone will  
indicate if there are any voice mail messages available.  
This function operates differently depending on the PBX system in question  
therefore please contact your system administrator for more information.  
If the unit is not connected through a PBX please select ring indication.  
please contact your system administrator for more information.  
Hearing Aid Compatibility  
This unit is compatible with most inductively coupled hearing aids on the  
market. However due to the wide range of hearing aids available we cannot  
guarantee that the TP30 will function error free with every model.  
12  
 
The Phone Book  
The Phone Book  
The Phone Book will store 32 telephone numbers (22 digits max) and  
their associated names (16 characters max) with entries arranged  
alphabetically.  
A stored phone number can be dialled using fewer keystrokes than if  
dialled manually. If you subscribe to a Caller ID service, the name/number  
of the caller will be shown when you receive an incoming call.  
Storing names/numbers  
1. Press  
.
2. Press STORE.  
3. Press STORE again.  
4. Enter the telephone number to be stored (up to 22 digits). Press STORE.  
5. Enter the name (up to 16 characters). Press the corresponding number  
button one or more times for the first letter.  
6. Press STORE.  
Dialling from the Phone Book  
1. Press  
.
2. Scroll to the required memory location using or . To quick-search  
in the Phone Book press the corresponding number button one or  
more times for the first letter.  
3. Press CALL BACK to dial the displayed number. If you press  
the  
phone will return to standby mode.  
13  
 
The Phone Book  
Changing phone numbers/names  
1. Press  
.
2. Scroll to the required memory location using or .  
3. Press STORE EDIT? is displayed. Press STORE.  
4. Changes to the displayed telephone number can be made using  
DELETE/OK. Press STORE.  
5. Changes to the displayed name can be made using DELETE/OK  
6. Press STORE to confirm the changes.  
Deleting a phone book entry  
1. Press  
.
2. Scroll to the required memory location using or .  
3. Press DELETE/OK. DELETE will be displayed.  
4. Alternatively press and hold DELETE/OK button until the display shows  
DELETE ALL” .  
5. Press DELETE/OK confirm.  
14  
 
Memory  
Memory  
The telephone also has 4 one-touch, 10 two-touch memories and a  
mailbox button for frequently dialled telephone numbers.  
When a number is stored into Memory you only press one or two buttons  
dependent on location to make a call.  
The one-touch memories are (mail box), M1-M4, the two-touch  
memories are accessed using the telephone keypad digits 0-9.  
Storing One-touch Memories + Mailbox Button  
1. Press STORE button.  
2. Enter the telephone number to be stored (up to 22 digits). Press  
STORE button.  
3. Enter the name (up to 16 characters). Press the corresponding number  
button one or more times for the first letter. Press STORE button.  
4. “location ?” is display.  
5. Press either (mail box), M1-M4 to store the number.  
Dialling using One-touch Memories  
1. Lift the handset or press  
button and wait for a dialling tone.  
2. Press either  
now be dialled.  
(mail box), M1-M4, the stored telephone number will  
15  
 
Memory  
Storing two-touch Memories  
1. Press STORE button.  
2. Enter the telephone number to be stored (up to 22 digits). Press  
STORE button.  
3. Enter the name (up to 16 characters). Press the corresponding number  
button one or more times for the first letter. Press STORE button.  
4. “location ?” is display.  
5. Press either 0-9 to store the number.  
Dialling using Two-touch Memories  
1. Lift the handset or press  
button and wait for a dialling tone.  
2. Press MEM button.  
3. Select a memory location by pressing the relevant keypad digit 0-9.  
16  
 
Caller ID  
Caller ID  
Caller ID allows you to see who is calling before you answer a call and to  
see who has called in your absence. If the number is stored in the indirect  
memory, its associated name will be displayed instead. The CID memory  
will store up to 32 name/telephone numbers stored chronologically. The  
sequence number is shown in the top right-hand side of the display.  
When the memory is full, the oldest number will be deleted automatically  
as the new call is logged. New calls are indicated in plain text in the  
display and flashing of the red visual ring indicator light.  
Please note!  
In order for numbers to be shown, the Caller ID service must be  
provided by your network operator and a current subscription in place.  
Contact you telephone service operator for more information.  
Retrieving and dialling CID numbers  
1. Press CID button to select caller-id mode.  
2. Press either or to review the numbers stored in the Caller ID  
memory.  
3. To dial a displayed telephone number either press CALL BACK OR  
botton, the displayed telephone number will now be dialled. If you  
press  
botton,then the phone will return to standby mode.  
17  
 
Caller ID  
CID Call Types  
Besides showing telephone numbers, the display can show a number of  
messages:  
OUT OF AREA  
PRIVATE  
NEW  
It is an International call or a call from a PBX (no  
information received).  
Information on the number is blocked. The call could  
also be from a PBX.  
Number not previously seen.  
Several calls have been received from the same caller.  
Message waiting  
CALL WAITING  
Type II CID  
Deleting Numbers  
1. Scroll to the telephone number you wish to erase using or .  
2. Press DELETE/OK button, “DELETE/OK” will be displayed, alternatively  
press DELETE/OK button until the display shows “DELETE ALL”.  
3. Press DELETE/OK button confirm.  
Transferring Numbers to the Phone Book  
1. Scroll to the telephone number you wish to copy using or .  
2. Press STORE. “copy number?” is display.  
3. Press STORE confirm.  
18  
 
Warranty Information (Australia)  
Warranty Terms and Conditions (Australia)  
Oricom makes no other warranties or conditions, express or implied,  
including as to acceptable quality and fitness for a particular purpose,  
except as stated in this Warranty. Any implied warranties that may  
be imposed by law are limited in duration to the Warranty Period.  
Oricom warrants that the product is free from defects in materials  
or workmanship during the Warranty Period. This Warranty does  
not extend to any product from which the serial number has been  
removed or was purchased outside of Australia.  
This warranty in no way affects your statutory warranty rights  
under the Competition and Consumer Act 2010 or any other similar  
legislation.  
The Warranty Period will be 1 year from the date of purchase of the  
product evidenced by your dated sales receipt. You are required  
to provide proof of purchase as a condition of receiving warranty  
services. You are entitled to a replacement product or repair of the  
product according to the terms and conditions of this document if your  
product is found to be faulty within the Warranty Period. This Warranty  
extends to the original purchaser only and is not transferable.  
Batteries or Battery Packs (if supplied) with this product are covered  
under this warranty for a period of 90 days. Products distributed  
by Oricom are manufactured using new materials or new and used  
materials equivalent to new in performance and reliability. Spare  
parts may be new or equivalent to new. Spare parts are warranted to  
be free from defects in material or workmanship for thirty (30) days  
or for the remainder of the Warranty Period of the Oricom branded  
product in which they are installed, whichever is longer. During the  
Warranty Period, Oricom will where possible repair and if not replace  
the faulty product or part thereof. All component parts removed under  
this Warranty become the property of Oricom. In the unlikely event  
that your Oricom product has a re curring failure, Oricom may, subject  
19  
 
Warranty Terms and Conditions (Australia)  
to the Competition and Consumer Act 2010, at its discretion, elect to  
provide you with a replacement product of its choosing that is at least  
equivalent to your product in performance. Oricom does not warrant  
that the operation of the product will be uninterrupted or error free.  
Oricom is not responsible for damage that occurs as a result of your  
failure to follow the instructions that came with the product. These  
terms and conditions together with any specific terms and conditions  
contained in the user guide to the product purchased constitute  
the complete and exclusive agreement between you and Oricom  
regarding the product. No change to the conditions of this Warranty  
is valid unless it is made in writing and signed by an authorised  
representative of Oricom.  
Oricom will not be in breach of a warranty expressly set out in this  
User Guide or under the Competition and Consumer Act 2010 and  
excludes any liability for damages or any other remedy arising under  
any other legislation or the common law if the damage occurs as a  
result of:  
1 failure by you to adhere to the warnings and follow the instructions  
set out in this user guide for the proper installation and use of the  
product;  
2 negligence on your part or misuse by you of the product;  
3 an uncontrollable external cause which results in the product not  
functioning including but not limited to power failure, lightning or  
over voltage; and  
4 modification to the product or services carried out on the  
production by anyone other than Oricom or Oricom!/s authorised  
service provider.  
Oricom will not be liable for any damages caused by the product  
or the failure of the product to perform, including any lost profits or  
savings or special, incidental or consequential damages. Oricom is not  
liable for any claim made by a third party or made by you on behalf  
20  
 
Warranty Terms and Conditions (Australia)  
of a third party. This limitation of liability applies whether damages  
are sought, or a claim made, under this Warranty or as a tort claim  
(including negligence and strict product liability), a contract claim or  
any other claim. However, this limitation of liability will not apply to  
claims for personal injury. Nothing in this Warranty excludes, restricts  
or modifies any condition, warranty, right or remedy which pursuant to  
the Competition and Consumer Act 2010 applies to this Warranty and  
which may not be so excluded, restricted or modified. For warranties  
that cannot be excluded, restricted or modified, Oricom limits the  
remedies available to those specified in the relevant legislation.  
21  
 
Customer Support  
Customer Support  
If you have any problems setting up or using this product you will find  
use-full tips and information in the Troubleshooting section of this user  
guide as well as “Frequently Asked Questions” on our website  
If you have further questions about using the product after reviewing  
the resources above or would like to purchase replacement parts or  
accessories please call our Customer Support Team. Our dedicated local  
support team are more likely to be able to help you than the retailer  
where you made your purchase.  
Please retain your purchase receipt and attach to the back page of  
this user guide as you will need to produce this if warranty service is  
required.  
Take a few moments to register your product online:  
New Zealand  
Australia  
Phone: 0800 674 266  
Oricom International Pty Ltd  
Locked Bag 658  
(Monday to Friday 10am to 7pm  
NZST)  
South Windsor, NSW 2756  
Australia  
Phone: 1300 889 785  
(Monday to Friday 8am to 6pm AEST)  
Fax: (02) 4574 8898  
 

Miele Freezer KF 889 iDNE 1 User Manual
Miele Ventilation Hood DA 402 User Manual
Miele Washer w864 User Manual
MTD Yard Vacuum 24677L User Manual
Napoleon Grills Charcoal Grill PRO22K LEG User Manual
NETGEAR Network Router DGND4000 100NAS User Manual
Network Appliance Network Card Reseller Partner Program User Manual
Nuvo Stereo Amplifier NV E6XS User Manual
Panasonic Camera Accessories HHR300CH User Manual
Panasonic Fax Machine KX PW92CW User Manual